User manual

2.
Move the right tractor to adjust
the tractor to the paper width.
Open the left and right tractor
covers. Move the gap set lever
to position 6. Insert the paper
under the rear cover. Load the
paper and align the paper holes
with the tractor pins of the left
and the right tractor,
respectively.
Make sure that the paper is correctly aligned with the left and right
tractors.
3.
Close the left and right tractor
covers.Slide the right tractor to
take up any slack in the paper.
Move the tractor set lever of the
right tractor to lock the tractor.
4.
Move the gap set lever to the
proper position to set the paper
thickness.
Tract or s
☞
Chapter 3
3.30
A78401745-001