User Manual Part 1

24
Message Description
RELEASE KEY
This message is displayed when you can release the
PROGRAM
key in the
Self-test selection or in the Power-on Configuration procedure.
RESET & BREAK
When the input buffer is cleared an a break (250 msec.) on a serial
interface is sent pressing the
PROGRAM
and then the
ON LINE
keys.
SELF TEST
The printer is printing the self-test page.
SHIFT FUNCTION
This message appears to indicate that the Shift functions of the operator
panel keys have been selected pressing the
SHIFT
key.
TEAR IF NECESS.
PARK PAPER
These messages are displayed when the printer receives a paper parking
command. Tear off the fanfold then press the
PARK
key to park the paper.
TEAR IF NECESS.
EJECT PAPER
These messages are displayed when the printer receives a paper parking
command and the TEAR NO is selected for the tear-off function. Tear off
the fanfold then press the
PARK
key to park the paper.
TEAR OFF PAPER
PARK PAPER
These messages are displayed when the printer receives a paper parking
command but was not able to execute it, because the paper to be parked is
longer than 18 inch. Tear off the fanfold paper and then press the
PARK
key to park the paper.
TEAR OFF PAPER
EJECT PAPER
These messages are displayed when the printer receives a paper ejecting
command (TEAR NO has been selected for the tear-off function) but was
not able to execute it, because the paper to be ejected is longer than 18
inch. Tear off the fanfold paper and then press the
PARK
key to eject the
paper.
UNLOCKED MENU
When the access to the Printer Setups has been unlocked at the power on,
the printer displays this message.
For the error messages see "Error Handling" later in this manual.