User Manual
Table Of Contents
- Selecting the Display Language
- Configuring the Printer
- Operator Panel Presentation
- Printer Setups
- Power-On Configuration
- Entering the Power-On Configuration
- Printout of the Printer Settings
- Emulation Options
- Parallel Interface
- Serial Interface
- LAN Interface
- LAN Interface Parameters
- IP Assignment
- Enable/Disable the Novell Service
- Enable/Disable the SMTP Service
- Init IP Address
- Init Net Mask
- ID Default Gateway
- Mail Server Address
- Init Host Name
- Init Workgroup Name
- Security User Name
- Security Password
- E-mail Address
- Print Server Name in Novell Network
- Printer Name in Novell Network
- Queue Name in Novell Network
- Frame Type in Novell Network
- LAN Interface Parameters
- Functions
- Functions Group Parameters
- Setting the Functions Group Items
- Paper Loading Sequence
- Enable/Disable the Buzzer
- Ribbon Type Selection
- Bar Code Density
- Text Print Direction
- Graphics Print Direction
- Bar Codes Print Direction
- Paper Path at Power-On
- Selection of the Language of the Display Messages
- Enable/Disable Lower Tractor Jam Sensor
- Enable/Disable Upper Tractor Jam Sensor
- Adjusting the Tear-Off Position
- Resetting to Factory Default Values
- Entering the Power-On Configuration
- Program Setup
- Entering the Program Setup
- Main Structure
- Printout of the Printer Settings
- User Macro
- Selection of the User Macro
- User Macro Parameters
- Line Spacing
- Line Spacing Lock
- Page Length
- Top of Form
- Skip Over Perforation
- Draft Print Mode Selection
- Font Selection
- Pitch Selection
- Micro Dot Print Mode
- Pitch Lock
- Left Margin
- Right Margin
- Zero Character Printing
- Paper Path Selection
- Tear-Off Mode
- Print Impact Strength
- Paper Perforation
- Quiet Printing
- Adjusting the Distance of the Print Head
- Horizontal Character Tuning
- Vertical Character Tuning
- Resetting the Macro Parameters to the Factory Defaults
- Selecting Another Macro
- Passing over to the Power-On Configuration
- Hexadecimal Dump
- Entering the Program Setup
- How to Select the Paper Path
- How to Use the Tear-Off Function
- How to Lock/Unlock the Printer Setups
- How to Handle the Paper Parking
29
The following messages appear to indicate other printer conditions or user intervention requests.
The list is in alphabetical order.
Message Description
ALTERNATE
This message appears to indicate that the Alternate functions of the operator
panel keys have been selected pressing the
ALTERNATE
key.
BUSY M1
This message appears to indicate that the printer is printing. It is busy.
COVER OPEN
CLOSE COVER
When the printer cover is not closed correctly, the buzzer sounds and the
display shows alternately these two messages. Close the printer cover.
EJECTING
The printer is ejecting the paper out of the printer.
INITIALIZING LAN
This message is displayed when the LAN is reset (only if the LAN interface
board is installed).
LOAD FRONT 1
LOAD FRONT 2
These messages are displayed when the corresponding paper path is out of paper.
LOCKED MENU
When the access to the Printer Setups has been locked at the power on, the
printer displays this message.
MACRO CHANGING
The macro has been changed and the printer is updating the settings.
MICRO FEED DOWN
The paper is fed in microsteps downwards when pressing the
↓
arrow key .
MICRO FEED UP
The paper is fed in microsteps forwards when pressing the
↑
arrow key.
OPT. I/F CHANGED
PRESS ON LINE
These messages are displayed at power on when the I/F board option has been
changed previously in the printer. Press the
ON LINE
key to confirm.