User Manual
Table Of Contents
- Selecting the Display Language
- Configuring the Printer
- Operator Panel Presentation
- Printer Setups
- Power-On Configuration
- Entering the Power-On Configuration
- Printout of the Printer Settings
- Emulation Options
- Parallel Interface
- Serial Interface
- LAN Interface
- LAN Interface Parameters
- IP Assignment
- Enable/Disable the Novell Service
- Enable/Disable the SMTP Service
- Init IP Address
- Init Net Mask
- ID Default Gateway
- Mail Server Address
- Init Host Name
- Init Workgroup Name
- Security User Name
- Security Password
- E-mail Address
- Print Server Name in Novell Network
- Printer Name in Novell Network
- Queue Name in Novell Network
- Frame Type in Novell Network
- LAN Interface Parameters
- Functions
- Functions Group Parameters
- Setting the Functions Group Items
- Paper Loading Sequence
- Enable/Disable the Buzzer
- Ribbon Type Selection
- Bar Code Density
- Text Print Direction
- Graphics Print Direction
- Bar Codes Print Direction
- Paper Path at Power-On
- Selection of the Language of the Display Messages
- Enable/Disable Lower Tractor Jam Sensor
- Enable/Disable Upper Tractor Jam Sensor
- Adjusting the Tear-Off Position
- Resetting to Factory Default Values
- Entering the Power-On Configuration
- Program Setup
- Entering the Program Setup
- Main Structure
- Printout of the Printer Settings
- User Macro
- Selection of the User Macro
- User Macro Parameters
- Line Spacing
- Line Spacing Lock
- Page Length
- Top of Form
- Skip Over Perforation
- Draft Print Mode Selection
- Font Selection
- Pitch Selection
- Micro Dot Print Mode
- Pitch Lock
- Left Margin
- Right Margin
- Zero Character Printing
- Paper Path Selection
- Tear-Off Mode
- Print Impact Strength
- Paper Perforation
- Quiet Printing
- Adjusting the Distance of the Print Head
- Horizontal Character Tuning
- Vertical Character Tuning
- Resetting the Macro Parameters to the Factory Defaults
- Selecting Another Macro
- Passing over to the Power-On Configuration
- Hexadecimal Dump
- Entering the Program Setup
- How to Select the Paper Path
- How to Use the Tear-Off Function
- How to Lock/Unlock the Printer Setups
- How to Handle the Paper Parking
68
Queue Name in Novell Network
NOV. PRINTER NAME xxxxxxxxxxx
↑
NOV.QUEUE NAME …………..
→ or ←
↓
NOV.FRAME TYPE xxxxxxxxxxx
This item is displayed only if the
NOVELL EN.
function is selected
YES.
This function allows to create the print queue name in Novell network. Use the ← or → keys to
increase or decrease the values in one field and the ↓ or ↑keys to move to the next field (↓ to move
to the right and ↑ to move to the left). Press the
PROGRAM
key to save the print queue name. The
default printer name is
Q1.
Frame Type in Novell Network
NOV.QUEUE NAME xxxxxxxxxxx
↑
NOV.FRAME TYPE 0
→ or ←
NOV. FRAME TYPE …
→ or ←
NOV. FRAME TYPE 30
→ or ←
↓
LAN INTERFACE
This item is displayed only if the
NOVELL EN.
function is selected
YES.
These values select the frame type number in Novell network. This number ranges between 0 and
30. The default frame type number is
0.