User`s guide

Select 2 of 5 MATRIX Bar Code (DC4 DC4 ESC ! NN 19 PP EM)
14 14 1B 21 NN 13 PP 19
The control selects the 2 of 5 Matrix bar code.
The DATA field for this bar code does not have a defined length, but the DATA field must contain only
ASCII numeric (0 to 9) data.
NN is a one-byte hexadecimal number that specifies the height of the bar code symbol as 1 to 12 (1/6 to
12/6 inch, or 2 inches).
PP is a one-byte hexadecimal number that specifies whether or not to print the bar code in Human
Readable Characters as follows:
00 Do not print human readable characters
01 Print human readable characters
Select CODE 3 of 9 Bar Code (DC4 DC4 ESC ! NN 20 PP EM)
14 14 1B 21 NN 14 PP 19
This control selects the Code 3 of 9 bar code.
The DATA field for this bar code does not have a defined length, but must start and end with an *.
The DATA field may contain alphanumeric data as follows:
0123456789
ABCDEFGHIJKLMNOPQRSTUVWXYZ
Space-.$/+%
* (as start/stop character)
NN is a one-byte hexadecimal number that specifies the height of the bar code symbol as 1 to 12 (1/6 to
12/6 inch, or 2 inches).
PP is a one-byte hexadecimal number that specifies whether or not to print the bar code in Human
Readable Characters as follows:
00 Do not print human readable characters
01 Print human readable characters
Select CODABAR Bar Code (DC4 DC4 ESC ! NN 22 PP EM)
14 14 1B 21 NN 16 PP 19
This control selects the Codabar bar code.
The DATA field for this bar code does not have a defined length, and must contain only the data
characters listed below. Any combination of start/stop characters is allowed.
0123456789-$:/.+
ABCDENT*abcdent(asstart/stop characters)
32 Programmer Manual