User's Manual

92
BTTracer Protocol Analyzer User’s ManualCATC Version 1.0
though use of the .rec is recommended; if no extension is
specified, .rec is added by default.
•ClickLoad to load a previously saved *.rec file, thus restoring a
previous set of Recording Options.
•TheSave as Default function is equivalent to the Save function,
specifying the file name default.rec. Whenever you start up the
Analyzer, it automatically loads the default.rec file if one exists.
•ClickOK to apply any changes and close this dialog box.
•ClickCancel to cancel any immediate changes you have made
and exit the Recording Options menu.
7.6 Recording Bluetooth Traffic
To start recording Bluetooth™ traffic once the appropriate Recording
Options have been set,
Step 1 Select Start under Record on the Menu Bar
OR
Click on the Tool Bar.
Your recording session can continue until it has finished naturally or you
may need to stop manually by clicking on the Tool Bar, depending on
how you set the Recording Options.
To manually stop recording,
Step 2 Select Stop under Record on the Menu Bar
OR
Click on the Tool Bar.
Note The manual Stop Recording feature is primarily of use when recording
low-volume traffic, which can take a long time to fill the recording buffer.
When the recording session is finished, the bus traffic is saved to the hard
drive as a file named data.blt or whatever name you assign as the default
filename.
To save a current recording for future reference,
Step 3 Select Save As under File on the Menu Bar.
OR