User's Manual
Table Of Contents
- Table of Contents
- 1. Overview
- 2. Quick Installation
- 3. Detailed Installation
- 4. Updates
- 5. Software Overview
- 6. Recording Wizard
- 7. Recording Options
- 8. Display Options
- 9. Reading a CATC Trace
- 10. Decoding Higher Protocols
- 10.1 Introduction
- 10.2 LMP and L2CAP Messages
- 10.3 Decoding and Viewing Higher Protocol Data
- 10.4 Tooltips
- 10.5 Viewing Packets in LMP and L2CAP Messages
- 10.6 Types of LMP and L2CAP Messages
- 10.7 Viewing L2CAP Channel Connections
- 10.8 Viewing Protocol Messages and Transactions
- 10.9 Changing Protocol Assignments
- 11. Other Features
- How to Contact CATC
- Warranty and License
- Index
96
BTTracer Protocol Analyzer User’s ManualCATC Version 1.0
• Wrap: Inhibits carriage returns in packets when they exceed the width of the
window.
• Trace Viewing Level: Enables different levels of transaction to be displayed.
• Display Configuration Name:ACommentfieldassociatedwiththe*.opt file
containing the current Display Options values. You can also create and store
your unique Display Options for future use.
• Fonts: Allows field fonts and data fonts to be changed. The fonts can be
italisized and/or bolded by pressing the I and/or B buttons.
Trace Viewing Level
Trace Viewing Level allows BTTracer to display ten levels of transaction:
• Packet
Packet is the default selection.
• LMP Messages
• L2CAP Messages
• STP Messages
• STP Protocol
• TCS Messages
• TCS Protocol
• RFCOMM Protocol
• OBEX Protocol
• AT Commands Protocol
• HDLC Frames
• PPP
• BNEP
Changing the Trace
View Level
To change the
Trace Viewing Level, use the decode buttons on the toolbar or select a
checkbox in the Display Options dialog box.
For further details on these viewing levels, see the Chapter 7: Decoding
Higher Protocols.
Creating New Display Options Files
To create a new Display Options file,
Step 1 Enter a comment for the new file in the Display
Configuration Name field.