User's Manual
Table Of Contents
- Table of Contents
- 1. Overview
- 2. Quick Installation
- 3. Detailed Installation
- 4. Updates
- 5. Software Overview
- 6. Recording Wizard
- 7. Recording Options
- 8. Display Options
- 9. Reading a CATC Trace
- 10. Decoding Higher Protocols
- 10.1 Introduction
- 10.2 LMP and L2CAP Messages
- 10.3 Decoding and Viewing Higher Protocol Data
- 10.4 Tooltips
- 10.5 Viewing Packets in LMP and L2CAP Messages
- 10.6 Types of LMP and L2CAP Messages
- 10.7 Viewing L2CAP Channel Connections
- 10.8 Viewing Protocol Messages and Transactions
- 10.9 Changing Protocol Assignments
- 11. Other Features
- How to Contact CATC
- Warranty and License
- Index
108
BTTracer Protocol Analyzer User’s ManualCATC Version 1.0
From the Tool Bar
• Click to hide all Hop packets.
9.8 Hide Nulls and Polls
You can hide Nulls and Polls from a trace by pressing the Hide Nulls and
Polls button on the Tool Bar.
From the Tool Bar
• Click to hide all Nulls and Polls.
9.9 Menus in Clicked Fields
Youcandisplaythefollowingmenuwhenyouclickinafieldinatrace.
9.10 Hide Unassociated Traffic
You can hide all traffic that is not associated with the current decode level
by pressing the Hide Unassociated Traffic button on the Tool Bar.
From the Tool Bar
• First, click one or more decode buttons such as the View L2CAP Messages
. This button will cause BTTracer to decode the trace and display
selected level of decode.
• Next, click to hide all unassociated traffic.
The Hide Unassociated Traffic button will cause BTTracer to hide all
traffic except for the selected decode messages or protocols. In the example
above, all packets would be hidden and only L2CAP messages would
display.