User's Manual
Table Of Contents
- Table of Contents
- 1. Overview
- 2. Quick Installation
- 3. Detailed Installation
- 4. Updates
- 5. Software Overview
- 6. Recording Wizard
- 7. Recording Options
- 8. Display Options
- 9. Reading a CATC Trace
- 10. Decoding Higher Protocols
- 10.1 Introduction
- 10.2 LMP and L2CAP Messages
- 10.3 Decoding and Viewing Higher Protocol Data
- 10.4 Tooltips
- 10.5 Viewing Packets in LMP and L2CAP Messages
- 10.6 Types of LMP and L2CAP Messages
- 10.7 Viewing L2CAP Channel Connections
- 10.8 Viewing Protocol Messages and Transactions
- 10.9 Changing Protocol Assignments
- 11. Other Features
- How to Contact CATC
- Warranty and License
- Index
134
BTTracer Protocol Analyzer User’s ManualCATC Version 1.0
Step 6 Press OK.
The trace should reposition to the first DM1 or Poll packet that has an
Active Member address of 7.
Exclude all DM1 and Poll Packets with Active Member Addresses of 7.
Step 1 Select Packet Types from the From the Event Group
Step 2 Select DM1 and Poll from the box on the right.
Step 3 Select Header AM_Addr from the Event Group.
Step 4 Select AM_Addr=7 from the box on the right.
Step 5 From the Center area, select Intersection and Exclusion
Step 6 Press OK.
The trace will redisplay so that it excludes DM1 packets with AM_Addr=7 and
Poll packets with AM_Addr=7.
Exclude all packets with ANY of the following attributes: DM1, Poll, or
AM_Addr=7.
Step 1 Select Packet Types from the Event Groups.
Step 2 Select DM1 and Poll from the box on the right.
Step 3 Select Header AM_Addr from Event Group.
Step 4 Select AM_Addr=7 from the box on the right
Step 5 Select Union and Exclusion.
Selecting Union causes the analyzer to search for any of the selected
events.
Step 6 Press OK.
The trace will redisplay so that it excludes DM1s, Polls, or any packet with
AM_Addr=7.
Find Next
To apply the previous Find parameters to the next search,
• Select Find Next under Search on the Menu Bar
OR
Click on the Tool Bar.