User's Manual
Table Of Contents
- Table of Contents
- 1. Overview
- 2. Quick Installation
- 3. Detailed Installation
- 4. Updates
- 5. Software Overview
- 6. Recording Wizard
- 7. Recording Options
- 8. Display Options
- 9. Reading a CATC Trace
- 10. Decoding Higher Protocols
- 10.1 Introduction
- 10.2 LMP and L2CAP Messages
- 10.3 Decoding and Viewing Higher Protocol Data
- 10.4 Tooltips
- 10.5 Viewing Packets in LMP and L2CAP Messages
- 10.6 Types of LMP and L2CAP Messages
- 10.7 Viewing L2CAP Channel Connections
- 10.8 Viewing Protocol Messages and Transactions
- 10.9 Changing Protocol Assignments
- 11. Other Features
- How to Contact CATC
- Warranty and License
- Index
10
BTTracer Protocol Analyzer User’s ManualCATC Version 1.0
2.3 Your First Bluetooth™ Recording
After installing and launching the software, you can test BTTracer by
creating a recording of a General Inquiry. In this test, BTTracer will issue
a General Inquiry that asks local devices to identify themselves. BTTracer
then records the responses.
Step 1 Select Recording Options under Setup on the Menu Bar.
The Recording Options dialog box will open showing factory default
settings such as “manual trigger” and 1 Mbytes buffer size. For the
General Inquiry recording you are about to create, these settings can be
left unchanged.