User's Manual
Table Of Contents
- Table of Contents
- 1. Overview
- 2. Quick Installation
- 3. Detailed Installation
- 4. Updates
- 5. Software Overview
- 6. Recording Wizard
- 7. Recording Options
- 8. Display Options
- 9. Reading a CATC Trace
- 10. Decoding Higher Protocols
- 10.1 Introduction
- 10.2 LMP and L2CAP Messages
- 10.3 Decoding and Viewing Higher Protocol Data
- 10.4 Tooltips
- 10.5 Viewing Packets in LMP and L2CAP Messages
- 10.6 Types of LMP and L2CAP Messages
- 10.7 Viewing L2CAP Channel Connections
- 10.8 Viewing Protocol Messages and Transactions
- 10.9 Changing Protocol Assignments
- 11. Other Features
- How to Contact CATC
- Warranty and License
- Index
18
BTTracer Protocol Analyzer User’s ManualCATC Version 1.0
3.9 BTTracer Program Installation
The CATC BTTracer software is provided on a CD and also on six 3½ inch
diskettes. The software is also available on zip files at the CATC web site:
http://www.catc.com/support.html
If you are downloading the files from the CATC web site, you will be
retrieving several zipped files. The first of these has an executable called
install.exe. Double-click on this file and follow the on-screen instructions.
Installation of the analyzer software requires a Windows 98, Windows
98SE, Windows 2000, Windows ME, or Windows XP operating system. If
you are loading BTTracer onto Windows NT 4.0 you will need to get a
separate diskette and instructions from CATC.
Loading the BTTracer USB Drivers
Before you can install the BTTracer Windows application, you will need to
install BTTracer as a USB device:
Step 1 Insert the BTTracer program CD into the CD ROM drive of
the PC that will be administering the Analyzer. If you prefer
to install from floppy diskette, install the floppy for your
operating system labeled Disk 1 of 6 into the a: drive.
Step 2 Power-on the BTTracer Analyzer.
Step 3 Connect the USB cable to the rear of the analyzer and to the
personal computer.
The host operating system detects the analyzer and begins to install the
USB driver.
Step 4 Follow the installation instructions provided on your screen
to complete the installation of the driver.
Note When Windows prompts you for a file, browse to the CATC floppy in the a: drive.
Installing the BTTracer Application Program
Run Setup.exe from the BTTracer CD or from the BTTracer floppy disk 1
of 6.
The CATC BTTracer Install Wizard automatically installs the necessary
files to the computer’s hard drive. BTTracer software is installed in the
C:\Program Files\CATC\BTTracer directory unless you specify otherwise.
Follow the installation instructions on your screen.