User's Manual
Table Of Contents
- Table of Contents
- 1. Overview
- 2. Quick Installation
- 3. Detailed Installation
- 4. Updates
- 5. Software Overview
- 6. Recording Wizard
- 7. Recording Options
- 8. Display Options
- 9. Reading a CATC Trace
- 10. Decoding Higher Protocols
- 10.1 Introduction
- 10.2 LMP and L2CAP Messages
- 10.3 Decoding and Viewing Higher Protocol Data
- 10.4 Tooltips
- 10.5 Viewing Packets in LMP and L2CAP Messages
- 10.6 Types of LMP and L2CAP Messages
- 10.7 Viewing L2CAP Channel Connections
- 10.8 Viewing Protocol Messages and Transactions
- 10.9 Changing Protocol Assignments
- 11. Other Features
- How to Contact CATC
- Warranty and License
- Index
19
BTTracer Protocol Analyzer User’s ManualCATC Version 1.0
3.10 BTTracer Program Startup
You can start the BTTracer program from the Desktop or from the installed
directory. The program always begins with its main screen active:
The software may be used with or without the analyzer box. When used
without an analyzer box attached to the computer, the program functions in
a Trace Viewer mode to view, analyze, and print captured protocol traffic.
When the program is used with the BTTracer Protocol Analyzer attached to
the computer, you can set trigger conditions, record, monitor and analyze
the activity of your Bluetooth™ device or piconet.