User's Manual
Table Of Contents
- Table of Contents
- 1. Overview
- 2. Quick Installation
- 3. Detailed Installation
- 4. Updates
- 5. Software Overview
- 6. Recording Wizard
- 7. Recording Options
- 8. Display Options
- 9. Reading a CATC Trace
- 10. Decoding Higher Protocols
- 10.1 Introduction
- 10.2 LMP and L2CAP Messages
- 10.3 Decoding and Viewing Higher Protocol Data
- 10.4 Tooltips
- 10.5 Viewing Packets in LMP and L2CAP Messages
- 10.6 Types of LMP and L2CAP Messages
- 10.7 Viewing L2CAP Channel Connections
- 10.8 Viewing Protocol Messages and Transactions
- 10.9 Changing Protocol Assignments
- 11. Other Features
- How to Contact CATC
- Warranty and License
- Index
20
BTTracer Protocol Analyzer User’s ManualCATC Version 1.0
3.11 Making a Recording
After installation, the software is configured to make a manual recording
("Manual Trigger") of General Inquiry traffic.
To make your first recording of this traffic,
Step 1 Click on the Tool Bar.
After 20 seconds, Inquiry timeout occurs and the analyzer will upload the
data and display the packets.
To terminate the recording before Inquiry timeout occurs,
Step 2 Click on the Tool Bar at any time before recording
automatically terminates.
When the recording session is finished, the traffic is saved to the hard
drive as a file named data.blt or whatever name you assign as the default
filename.
To save a current recording for future reference,
Step 3 Select Save As under File on the Menu Bar.
OR
Click on the Tool Bar.
You see the standard Save As screen.
Step 4 Give the recording a unique name and save it to the
appropriate directory.