User's Manual
Table Of Contents
- Table of Contents
- 1. Overview
- 2. Quick Installation
- 3. Detailed Installation
- 4. Updates
- 5. Software Overview
- 6. Recording Wizard
- 7. Recording Options
- 8. Display Options
- 9. Reading a CATC Trace
- 10. Decoding Higher Protocols
- 10.1 Introduction
- 10.2 LMP and L2CAP Messages
- 10.3 Decoding and Viewing Higher Protocol Data
- 10.4 Tooltips
- 10.5 Viewing Packets in LMP and L2CAP Messages
- 10.6 Types of LMP and L2CAP Messages
- 10.7 Viewing L2CAP Channel Connections
- 10.8 Viewing Protocol Messages and Transactions
- 10.9 Changing Protocol Assignments
- 11. Other Features
- How to Contact CATC
- Warranty and License
- Index
21
BTTracer Protocol Analyzer User’s ManualCATC Version 1.0
4. Updates
From time to time as modifications are made to BTTracer, it is necessary to
update the Firmware and/or BusEngine for optimal performance. Updates
can be performed two ways: either automatically or manually. This chapter
describes both procedures.
4.1 Software, Firmware, and BusEngine Revisions
The Readme.htm or Readme.txt file on the first installation disk and in the
installed directory gives last-minute updates about the current release.
Included with each release are the most recent downloadable images of the
Firmware and the BusEngine. The Readme file lists the latest versions and
informs you if new Firmware or a new BusEngine needs to be updated in
your hardware.
Once the Analyzer has completed the self diagnostics and is connected to
the PC, you can check the latest revision of the software and BusEngine:
• Selecting About Merlin… in the Help Menu.
You see this screen:
About Merlin details revisions of the following software and hardware:
•
Merlin Software Version
• Merlin Firmware Version
• BusEngine Version
• Unit Serial Number
Note When contacting CATC for technical support, please have available all the
revisions reported in the About Merlin window.