User's Manual
Table Of Contents
- Table of Contents
- 1. Overview
- 2. Quick Installation
- 3. Detailed Installation
- 4. Updates
- 5. Software Overview
- 6. Recording Wizard
- 7. Recording Options
- 8. Display Options
- 9. Reading a CATC Trace
- 10. Decoding Higher Protocols
- 10.1 Introduction
- 10.2 LMP and L2CAP Messages
- 10.3 Decoding and Viewing Higher Protocol Data
- 10.4 Tooltips
- 10.5 Viewing Packets in LMP and L2CAP Messages
- 10.6 Types of LMP and L2CAP Messages
- 10.7 Viewing L2CAP Channel Connections
- 10.8 Viewing Protocol Messages and Transactions
- 10.9 Changing Protocol Assignments
- 11. Other Features
- How to Contact CATC
- Warranty and License
- Index
3
Merlin Protocol Analyzer User’s ManualCATC Version 1.0
Important Notice: To comply with FCC RF exposure requirements
(sections 1.1307 and 1.310 of the Rules) only the antenna supplied by
CATC must be used for this device. The antenna must be located at least 20
cm away from all persons.
EU Conference Statement
This equipment complies with the R&TT Directive 1999/5/EC. It has been
tested and found to comply with EN55022:1994/A1:1995/A2:1997 Class A,
EN61000-4-2:1995, EN61000-4-3:1995, EN61000-4-4:1995,
EN61000-4-5:1995, EN61000-4-6:1995, EN61000-4-11:1994,
EN61010-1:1993, and ESTI EN 300 328-1 V1.2.2 (2000-07).
Manual Version 1.8 Part number: 730-0017-00