User's Manual
Table Of Contents
- Table of Contents
- 1. Overview
- 2. Quick Installation
- 3. Detailed Installation
- 4. Updates
- 5. Software Overview
- 6. Recording Wizard
- 7. Recording Options
- 8. Display Options
- 9. Reading a CATC Trace
- 10. Decoding Higher Protocols
- 10.1 Introduction
- 10.2 LMP and L2CAP Messages
- 10.3 Decoding and Viewing Higher Protocol Data
- 10.4 Tooltips
- 10.5 Viewing Packets in LMP and L2CAP Messages
- 10.6 Types of LMP and L2CAP Messages
- 10.7 Viewing L2CAP Channel Connections
- 10.8 Viewing Protocol Messages and Transactions
- 10.9 Changing Protocol Assignments
- 11. Other Features
- How to Contact CATC
- Warranty and License
- Index
24
BTTracer Protocol Analyzer User’s ManualCATC Version 1.0
Automatic Updates
When BTTracer’s software is updated, the software may become
incompatible with the BusEngine and Firmware. If a recording is
attempted, BTTracer will display an error message and then automatically
begin an update process for the BusEngine and Firmware. If you prefer, you
can abort this update and undertake the steps manually as described later in
this chapter.
To perform an automatic BusEngine and Firmware update,
Step 1 If needed, update the BTTracer software using the steps
outlined in "Software Updates" described above.
Step 1 Turn on the Analyzer.
Step 2 On the toolbar, click the button.
Since the BusEngine and/or the Firmware are incompatible with the
current BTTracer software version, an error message will appear
displaying your current versions and indicating what versions you need
to install.
Step 3 Click Yes.
The above window closes and the Analyzer Setup window opens.
Step 4 Click Update BusEngine or Update Firmware on the