User's Manual
Table Of Contents
- Table of Contents
- 1. Overview
- 2. Quick Installation
- 3. Detailed Installation
- 4. Updates
- 5. Software Overview
- 6. Recording Wizard
- 7. Recording Options
- 8. Display Options
- 9. Reading a CATC Trace
- 10. Decoding Higher Protocols
- 10.1 Introduction
- 10.2 LMP and L2CAP Messages
- 10.3 Decoding and Viewing Higher Protocol Data
- 10.4 Tooltips
- 10.5 Viewing Packets in LMP and L2CAP Messages
- 10.6 Types of LMP and L2CAP Messages
- 10.7 Viewing L2CAP Channel Connections
- 10.8 Viewing Protocol Messages and Transactions
- 10.9 Changing Protocol Assignments
- 11. Other Features
- How to Contact CATC
- Warranty and License
- Index
27
BTTracer Protocol Analyzer User’s ManualCATC Version 1.0
power-on diagnostics are being run. If there is a hardware failure, the
Trigger LED continues to blink after initialization is complete. If this
occurs, contact CATC for customer support.
Updating the Firmware
Within a new software release, it may also be necessary to update the
Analyzer’s firmware for proper operation. The Readme file informs you if
this is necessary.
To update the firmware,
Step 1 Click Update Firmware on the Analyzer Setup screen.
You see the Select firmware file window:
The program has already automatically searched for the correct file and
displays it in the File name field.
Step 2 Click Open.
The Analyzer updates the Firmware.
Step 3 Unplug the USB cable from the back of the Analyzer box
and then reinsert it so the new Firmware update can take
effect.