User's Manual
Table Of Contents
- Table of Contents
- 1. Overview
- 2. Quick Installation
- 3. Detailed Installation
- 4. Updates
- 5. Software Overview
- 6. Recording Wizard
- 7. Recording Options
- 8. Display Options
- 9. Reading a CATC Trace
- 10. Decoding Higher Protocols
- 10.1 Introduction
- 10.2 LMP and L2CAP Messages
- 10.3 Decoding and Viewing Higher Protocol Data
- 10.4 Tooltips
- 10.5 Viewing Packets in LMP and L2CAP Messages
- 10.6 Types of LMP and L2CAP Messages
- 10.7 Viewing L2CAP Channel Connections
- 10.8 Viewing Protocol Messages and Transactions
- 10.9 Changing Protocol Assignments
- 11. Other Features
- How to Contact CATC
- Warranty and License
- Index
46
BTTracer Protocol Analyzer User’s ManualCATC Version 1.0
The Advanced button on the right will open the Recording Options
dialog box shown below. This screen will show the settings you selected
through the Recording Wizard have been applied to the Recording
Options dialog.
Step 13 Press Next to advance the Recording Wizard to the next screen.
The following screen displays:
BTTracer pages the Master and if specified in Step 8, the Slave devices.