User's Manual
Table Of Contents
- Table of Contents
- 1. Overview
- 2. Quick Installation
- 3. Detailed Installation
- 4. Updates
- 5. Software Overview
- 6. Recording Wizard
- 7. Recording Options
- 8. Display Options
- 9. Reading a CATC Trace
- 10. Decoding Higher Protocols
- 10.1 Introduction
- 10.2 LMP and L2CAP Messages
- 10.3 Decoding and Viewing Higher Protocol Data
- 10.4 Tooltips
- 10.5 Viewing Packets in LMP and L2CAP Messages
- 10.6 Types of LMP and L2CAP Messages
- 10.7 Viewing L2CAP Channel Connections
- 10.8 Viewing Protocol Messages and Transactions
- 10.9 Changing Protocol Assignments
- 11. Other Features
- How to Contact CATC
- Warranty and License
- Index
50
BTTracer Protocol Analyzer User’s ManualCATC Version 1.0
Step 2 Press Next to advance to the next screen.
You will see three choices:
Step 3 Select the second option: I want BTTracer to record
traffic on a piconet that has already been established.
Step 4 Press Next.
You will see four choices:
Select the hop mode appropriate to your area.
Step 5 Select the hop mode appropriate to your area, then press
Next.