User's Manual
Table Of Contents
- Table of Contents
- 1. Overview
- 2. Quick Installation
- 3. Detailed Installation
- 4. Updates
- 5. Software Overview
- 6. Recording Wizard
- 7. Recording Options
- 8. Display Options
- 9. Reading a CATC Trace
- 10. Decoding Higher Protocols
- 10.1 Introduction
- 10.2 LMP and L2CAP Messages
- 10.3 Decoding and Viewing Higher Protocol Data
- 10.4 Tooltips
- 10.5 Viewing Packets in LMP and L2CAP Messages
- 10.6 Types of LMP and L2CAP Messages
- 10.7 Viewing L2CAP Channel Connections
- 10.8 Viewing Protocol Messages and Transactions
- 10.9 Changing Protocol Assignments
- 11. Other Features
- How to Contact CATC
- Warranty and License
- Index
58
BTTracer Protocol Analyzer User’s ManualCATC Version 1.0
The following dialog box will display:
Step 20 Press Retry or Back to re-attempt the process.
If the hardware failure described in Steps 20 and 21 do not occur,
BTTracer will conduct an inquiry. The screen will show that BTTracer
is going to attempt a recording in either ’Passive Sync & Record’ mode
as shown below or in ’Sync & Record’ mode depending on the options
you selected in Step 15.
Step 21 If you are recording in ’Passive Sync & Record’ mode, you will
need to direct your Master device to attempt a connection to
BTTracer. This will provide BTTracer with the information it needs
to record the piconet.