User's Manual
Table Of Contents
- Table of Contents
- 1. Overview
- 2. Quick Installation
- 3. Detailed Installation
- 4. Updates
- 5. Software Overview
- 6. Recording Wizard
- 7. Recording Options
- 8. Display Options
- 9. Reading a CATC Trace
- 10. Decoding Higher Protocols
- 10.1 Introduction
- 10.2 LMP and L2CAP Messages
- 10.3 Decoding and Viewing Higher Protocol Data
- 10.4 Tooltips
- 10.5 Viewing Packets in LMP and L2CAP Messages
- 10.6 Types of LMP and L2CAP Messages
- 10.7 Viewing L2CAP Channel Connections
- 10.8 Viewing Protocol Messages and Transactions
- 10.9 Changing Protocol Assignments
- 11. Other Features
- How to Contact CATC
- Warranty and License
- Index
63
BTTracer Protocol Analyzer User’s ManualCATC Version 1.0
7. Recording Options
The Recording Options dialog box lets you configure BTTracer for
recording Bluetooth™ data. This dialog box offers an alternative to the
Recording Wizard described in the previous chapter. At the top of the
Recording Options dialog box are four tabs that provide access to dialog
boxes called General, Modes, Events, and Actions. Using these dialog
boxes, you can configure BTTracer to create event triggers, increase or
decrease memory allocation for recording, and interact with other
Bluetooth™ devices in different ways.
Opening the Recording Options Dialog Box
To open the Recording Options menu, click on the Tool Bar or select
Recording Options under Setup on the Menu Bar.
You s e e the Recording Options window:
The Recording Options window has four tabs marked