User's Manual
Table Of Contents
- Table of Contents
- 1. Overview
- 2. Quick Installation
- 3. Detailed Installation
- 4. Updates
- 5. Software Overview
- 6. Recording Wizard
- 7. Recording Options
- 8. Display Options
- 9. Reading a CATC Trace
- 10. Decoding Higher Protocols
- 10.1 Introduction
- 10.2 LMP and L2CAP Messages
- 10.3 Decoding and Viewing Higher Protocol Data
- 10.4 Tooltips
- 10.5 Viewing Packets in LMP and L2CAP Messages
- 10.6 Types of LMP and L2CAP Messages
- 10.7 Viewing L2CAP Channel Connections
- 10.8 Viewing Protocol Messages and Transactions
- 10.9 Changing Protocol Assignments
- 11. Other Features
- How to Contact CATC
- Warranty and License
- Index
75
BTTracer Protocol Analyzer User’s ManualCATC Version 1.0
After sync is established, BTTracer will remain in sync as long as there is
piconet traffic.
Debug/Test
Enable CATC debug file
Checking this box enables the creation of a file that can be used by CATC
Support to aid in debugging. This option should always be disabled unless
you are requested to enable it by CATC personnel.
7.3 Recording Options - Events
If you have selected Event Trigger mode under the General tabinthe
Recording Options screen, you may now select specific Bluetooth™ events
using the Events tab on the Recording Option Screen. You can also use the
Actions tab to define specific event sequences that will trigger BTTracer to
record a Bluetooth™ session.
In addition, the Events and Actions screens allow you to specify which
packets you want to include or exclude from the recording.
Events Options
• Click the Events tabontheRecording Options screen.
You see the Event Groups window: