User's Manual
Table Of Contents
- Table of Contents
- 1. Overview
- 2. Quick Installation
- 3. Detailed Installation
- 4. Updates
- 5. Software Overview
- 6. Recording Wizard
- 7. Recording Options
- 8. Display Options
- 9. Reading a CATC Trace
- 10. Decoding Higher Protocols
- 10.1 Introduction
- 10.2 LMP and L2CAP Messages
- 10.3 Decoding and Viewing Higher Protocol Data
- 10.4 Tooltips
- 10.5 Viewing Packets in LMP and L2CAP Messages
- 10.6 Types of LMP and L2CAP Messages
- 10.7 Viewing L2CAP Channel Connections
- 10.8 Viewing Protocol Messages and Transactions
- 10.9 Changing Protocol Assignments
- 11. Other Features
- How to Contact CATC
- Warranty and License
- Index
82
BTTracer Protocol Analyzer User’s ManualCATC Version 1.0
7.4 Recording Options - Actions
The Actions screen allows you to specify the type of action that BTTracer
should perform when it encounters the events specified in the Events
window.
Actions Window Layout
The Actions window divides into three sections: a left, a center, and a right
section.
The left section displays Event buttons such as Header buttons and Error
buttons. The number of Event buttons displayed depends on the number of
Events you selected in the Events window. If you selected no Events, no
Event buttons will display. If all Events were selected, eight Event buttons
will display.
The center section displays two Counter buttons marked Count1 and
Count2. These buttons are used for counting events and are permanent
features of this section.