Hardware manual

4.1.8. Active Scan Function
--- Open OSD window
--- Press F3
--- Press ESC to exit
Note: the KVM switch will skip the power-off computers or channels. If your system is in secure mode, this
function will be deactivated.
4.1.9. Memory Function
If you want to know the status of the connected computers or channels, just open the OSD window, and the position of
highlighted bar will show you the current computer or channel.
Note: this function is only available when using OSD to select computers or channels.
4.1.10. Set Password
This function is only used if you are running your system in secure mode, if you have forgotten your password; please
return this device to the manufacturer.
Only 8 port versions offer this function.
--- Open OSD window
--- Press F3
--- Move up and down arrow key to highlight the channel of SET PASSWORD
--- Press Enter
--- Move up and down arrow key to highlight the channel you want to set
--- Press Enter
--- Enter the password
--- Press Enter
--- Enter the new password again
--- Press Enter
When the user password is set, you can only use the ESC key to enter OSD window; you can enter the channel number
if password has not been set.
Note: If your system is in secure mode, selection by the push button and hot key will not work.
4.2. Selection by Hot Key
Hot Key combination enables you to select a channel easily.
Operation:
Ctrl + Shift + (A-----H) + Enter
Example:
Ctrl + Shift + B + Enter This is to select computer 2 (computer B)
Note: Use the left CTRL and shift keys.
Nd-WNxx-KB 1U Rack LCD Drawer Hardware User Guide
This document contains Confidential/Proprietary Information belonging to Computer Dynamics
4-3