High Resolution Color Monitor Printed on the recyclable paper Printed in Korea Part No.
FCC Information This equipment has been tested and found to comply with limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful inteference to radio Reorient or relocate the receiving antenna.
Introduction Introduction Caution ENGLISH Features Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 19-inch(18 inch visual)high performance display color monitor Warning If this equipment has more than one interface connector, do not leave cables connected to unused interfaces.
Introduction Introduction Provided with this monitor is a detachable power supply cord with IEC320 style terminations. It may be suitable for connection to any UL listed personal computer with similar configuration. Before making the connection ensure that the voltage rating of the computer convenience outlet is the same as the monitor and that the ampere rating of the computer convenience outlet is equal to or exceeds the monitor current rating.
Installation Controls Pin assignment table D-Sub Mini 15pin connector 15 Pin D-Sub Red Video Green Video Blue Video Frame Ground N.C Red Ground Green Ground Blue Ground Macintosh Red Ground Red Video H/V Sync. Sense (0) Green Video Green Ground Sense (1) N.C 9 10 11 12 13 N.C Sync. Ground Ground SDA H-Sync. Blue Video Sense (2) Ground V-Sync. Blue Ground 14 15 V-Sync. SCL Ground H-Sync. 1 ENGLISH Pin No.
Controls Controls 31.5KHz 60HzPP 31.5KHz CONTRAST 60HzPP GEOMETRY BRIGHTNESS 50% ENGLISH Geometry Controls Menu Contrast & Brightness Menu 50% EXIT : Exit the Brightness or Contrast menu. Cursor : Increase or decrease the Brightness Cursor : Increase or decrease the Contrast. Position Menu POSITION : Move the image vertically up or down. : Move the image horizontally left or right.
Controls Troubleshooting OSD Position Menu POSITION : Moves the OSD Position vertically up or down. : Moves the OSD Position horizontally left or right. PRESS If your monitor is not performing properly, please use the following troubleshooting chart for quick solutions to common problems.
Specifications Appendix ITEM CTL 9Ln CRT Type 19 , 90 deflection, FST CRT Dot pitch 0.26mm (0.22 in Hor.) CRT Surface This Monitor B19BL has preset modes for the 14 most popular industry standards for Plug and Play capability. Horizontal Non-glare, ARASC Sync. Input Signal H/V Separate, TTL, positive/negative Video Video Sync. Sync. H/V Composite, TTL, positive/negative Video Scanning frequency Horizontal Vertical Maximum Resolution RGB Analog (0.