User's Manual

CT-EM2506 ZigBee Ready RF Transceiver Modules

7. Introduction

The CT-EM2506 series of modules are specially designed for ZigBee application. They

provide a fast jump start design for system integrators or electronic designers wishing to

use ZigBee wireless technologies. The module contains qualified RF hardware and

enough processor power to run the EmberZNet stack or other ZigBee network stack

(depending on version), making it a powerful platform for building wireless networking

products. ZigBee Coordinators (ZC), ZigBee Routers (ZR), and ZigBee End Devices

(ZED) are all supported and are programmed onto the module together with a custom

application. Minimal RF design experience is needed to use CT-EM2506 modules.

8. Typical application block

Ember

EM250

Temp.

Sensor

Hum.

Sensor

VDD_PADS=2.7-3.6V

4 General A/D

Debug and

programming

interface

SIF PIN

MCU and/or

Peripheral

Equipment

SIF PIN

GPIO PIN

FEM