User's Manual

Systemmenu



Tojoinanetworkandconnecttotheutilitycompany:

1. Enterthe‘System’menu.

2. PressUPtoselect‘Channel’andpressMENUtoconfirm.

3. Thestatusis‘NoNetwork’.UseUPorDOWNtoselectoneof

thefollowing:

• ‘Auto’–enablesanautomaticscanforthechannel.

• ‘All’–searchesallchannels.

• ‘Channel’–Ifyouknowyourchannelnumberenterit

here(numbers1to26).

4. PressScantoconfirmandstartscanningforanetwork.Thestatuswillnowshowas‘NotJoined’.

5. Tojointhenetwork,pressJoin.Thestatuswillshowas‘JoinedNetwork’ifyousuccessfulconnecttoyourutilitycompany

or‘JoinFailed’ifyouconnectionhasbeenunsuccessful.Ittakesapproximatelyoneminutefortheconnectionprocessto

complete.Ifyouexperienceproblemsconnectingtoyourutilitynetwork,pleasecontactyourutilitycompany.



Todisconnectfromanetwork:

1. Enterthe‘System’menu.

2. PressLvNwrktoexitthenetwork.



Note:PANID/ExternPANID/E01Address/VERSION–areallcodesthat

youmaybeaskedtosupplyifyouphonefortheutilitycompanyfor

technicalsupport.



10

