User's Manual

ManualsBrandsComputime ManualsElectronicsRemote Transmitter

50D0077 Rev 1 Page 1 of 10 Ambient Technologies

A Division Of MHS

WWTD

Wireless Wall Thermostatic On/Off Remote Control

INSTALLATION AND OPERATING INSTRUCTIONS

This wireless wall thermostatic on/off remote control – system provides a safe, reliable, and user-friendly remote

control for millivolt valve gas appliances. The system can be operated in a thermostatically or manual mode.

Always check the appliance home owner’s manual for additional information, or warnings regarding accessory

installation before connecting this remote control system.

Carefully inspect the contents for shipping damage. If any parts are missing or damaged, immediately contact the

dealer from whom you purchased the kit. Do not attempt to install any part of the kit unless all parts are in good

condition. Please keep this booklet for future reference.

CONTENTS OF KIT

Description Qty

Transmitter 1

Battery Alkaline AA ( for Transmitter) 2

Receiver (Assembly) consists of: 1

Receiver Box with Adapter

Slide Button-Black (On/RS/Off)

L-Bracket (Floor Mount)

Battery Alkaline AA (for Receiver) 4

Wall Cover Plate-Black 1

Wall Cover Plate-White 1

Slide Button-White (On/RS/Off) 1

Screws (for Wall Cover Plate) 2

Plug-In Wiring Assembly – 18” Inches 1

Velcro (Loop and Hook) 1

Wall Anchor Screws 2

Wall Anchor 2

Screws (for fireplace system control covers) 2

Installation Instructions 1

FEATURES/SPECIFICATIONS

• Contemporary Ergonomic Style Transmitter with Large LCD Display

• Backlit LCD Display

• Battery Powered Transmitter

• Compact 30” wire length of plug in Adapter

• Pre-Programmed for Quick Installation

• Low battery Indication

• Child Proof Lock-out

• 128 Security Codes

• Quick Disconnect Wiring Assembly

• On/Off, Thermostatic, Timer, and 5-2 Day Thermostatic Programming Flexibility

• Reset Button

Summary of content (10 pages)

PAGE 1
WWTD Wireless Wall Thermostatic On/Off Remote Control INSTALLATION AND OPERATING INSTRUCTIONS This wireless wall thermostatic on/off remote control – system provides a safe, reliable, and user-friendly remote control for millivolt valve gas appliances. The system can be operated in a thermostatically or manual mode. Always check the appliance home owner’s manual for additional information, or warnings regarding accessory installation before connecting this remote control system.
PAGE 2
WARNING Important Safety Information • • • • NOTE Due to the sensitive temperature monitoring components in the transmitter, it is necessary to allow the transmitter to stabilize to room temperature before accurate room temperatures are displayed. If the transmitter is activated from a severe cold condition, allow 15 minutes for accurate temperature readings to appear on the LCD. WARNING Turn appliance OFF and allow to cool before installing or servicing.
PAGE 3
INSTALLATIONS Remote Receiver: The remote receiver may be wall mounted or installed into the appliance per the appliance homeowner’s manual. Refer to the Homeowner’s Manual for special installation instructions. If wall mounted, the remote receiver must be installed in a junction box with cover plate provided. Failure to follow the installation instructions found in the appropriate Homeowner’s Manual will void the warranty and may cause a fire hazard.
PAGE 4
Wireless Wall Transmitter: Installing Wireless Transmitter to Wall: The wireless transmitter can be installed within a radius of 30 feet with no object in between the line of sight of the receiver . Choose a mounting location about 5 feet above the floor in an area with good air circulation and away from the following: 1. Air Ducts 2. Radiant heat from the sun and appliances 3. Concealed pipes and chimneys Installations: 1.
PAGE 5
WARNING Do not use two (2) or more remote control systems in the same area with the same dip switch settings, as they will communicate with each other. This may cause the appliances to malfunction. OPERATIONS: Wireless Wall Transmitter: General: The RCT Remote Control has four (4 ) operatin g modes: Manual, Timer, Auto, and Auto-P. The control system can be set to tempera ture ranges between 45°F and 90°F. The transmitter will operate the remote receiver from 1foot to a maximum of 30 feet.
PAGE 6
Reset Button: 1. 2. The reset button can be used to reset the systems such as the clock setting. The reset button is located behind the front flip door. Using a paper clip, press the button and the system will reset and go into clock setting mode. Setting Clock: 1. 2. While in Manual mode, press SET to enter clock setting mode. In clock setting mode, only clock is displayed. Press SET to select item (hour, minute or day). Selected item is flashing. Press 4 or 3 to change. Selected item is flashing.
PAGE 7
Auto-P mode will allow the remote control systems to thermostatically control the appliance on weekdays (Monday to Friday) and /or on weekends (Saturday and Sunday). The remote control systems cannot be programmed for individual days. Each group of days (weekdays/weekends) can be programmed for up to two sets of time settings to cycle. 1. 2. 3. Press AUTO and ON buttons simultaneously and hold for 3 seconds to enter auto programming mode. Press AUTO to start programming the remote.
PAGE 8
2. The transmitter will not work mode until child-proof mode is deactivated by pressing the ON and OFF buttons simultaneously for 3 seconds again to exit child-proof mode. Transmitter Thermal Shutdown: 1. 2. If transmitter measures a room temperature exceeding 99 degrees Fahrenheit, the LCD will display “HI” and the transmitter will turn off the appliance. Transmitter will not function until the room temperature has dropped below 99 degree Fahrenheit. Receiver: Slide Switch: 1. 2. 3. 1. 2. 3. 4. 5. 6.
PAGE 9
Symptom 1. LCD display is blank 2. LCD display shows “funny” display 4. Appliance does not come on after pressing ON on tranmitter Causes 1. Low Battery 1. Wiring / Electrical Connections 2. Privacy (DIP) switch setting on transmitter does not match receiver 3. Transmitter measures temperature exceeding 99 degrees Fahrenheit and shows “HI” on LCD 5. Receiver cannot receive signal. 4. Distance between the transmitter and receiver is more than 30 feet 1. Receiver is installed in an enclosure Action 1.
PAGE 10
This warranty and our liability does not apply to batteries, nor does it include damage to merchandise or the remote control resulting from accident, alteration, neglect, misuse, improper installation or any other failure to follow Ambient Technologies installation and operating instructions.