User's Manual

Comson (Shenzhen) Electronic Technology Co.,Ltd.
Portable Bluetooth Speaker
Mode No.:S08
S08 USER MANUAL
Thanks for purchase our products,
Please read all instruction before using your speaker
1. Support Bluetooth V5.0,Plays up to 10 meters (Approximately 30 feets);
2. Support TWS connection;
3. Support 3 playback modes: Bluetooth ( handfree), AUX In,TF card;
4. Using DSP IC to enhance the sound quality,make the sound is clear
and natural, the treble is beautiful and the bass is rich;
5. Embedded Symphony decorative lights;
6. Support Lossless audio format : APE, FLAC, MP3, WAV, WMA.
7. Support Auto Power-off:For Energy saving and battery protection,
it will automatically turn off after 30 minutes without any signal input.
1. Charging indicator
2. TYPE-C USB charging port
3. AUX input
4. TF card slot
5. Function button
6. Bluetooth indicator
7. Symphony decorative lights
8. Built-in MIC
1. On/Off : long press for 2 seconds to turn on or
standby, short press to turn off or turn on the
led lights;
2. Mode: Short press mode button to switch
(TF card, Bluetooth, AUX);
3. Previous/Volume -: short press for previous
song and long press to volume down;
4. Next/Volume +: short press for next song
and long press to volume up;
5. Play/Pause:
Short press to pause or mute, in Bluetooth mode, long press for 2
seconds to disconnected and re-pair, and then short press again to
connect to the current disconnected Bluetooth.
Waring:
the indicator light will be on when charging, and it will go out when fully charged. When
the battery is too low, "beep~" prompt sound, need to be charged in time. When the
product is not used for a long time, it is recommended to charge the product once every
quarter to extend the life of the lithium battery.
1X Audio Input signal cable;
1XType C charging cable;
1XUser manual
Charging and low battery reminder:
Date sheet and Specifications:
Accessories:
1. Bluetooth pairing mode:
Using the controls on your Bluetooth device, scan for and select “S08” in your Bluetooth
settings to pair. If your device requests a password, enter the default password “0 0 0 0” .
Refer to the user’s manual for your specific device for instructions on pairing and
connecting Bluetooth devices.
long press to turn on, the default is Bluetooth mode with a prompt tone, the Bluetooth
speaker will automatically enter the pairing connection ,and the bluetooth indicator light
flashes slowly;After paired,you can heard a prompt sound,and the blue indicator light on
and no flashes.
Kind noted :It’s will automatically connect to the last Bluetooth device which was paired.
2. TWS connection:
For first connection,Turn on the two Bluetooth speakers, long press the M button of any
one for 2 seconds to enter the TWS connection state, There will be a prompt tone after
the connection is successful.
After TWS connect successful,Kind noted:the speaker which one with the blue indicator
flashes slowly is left channel(Master),another one is right channel(Slave). Right channel
can control volume±;Play/pause; and OFF.
The speakers that have been successfully TWS paired will be automatically linked in next
time in bluetooth mode.
3. Bluetooth playing music and answering calls mode:
In Bluetooth mode, after the speaker and the Bluetooth device are connected, if a music
file has been added to the Bluetooth device’s music play list, short press the Bluetooth
speaker Play/pause button to control the phone or Bluetooth device Play music;
when the phone has an incoming call, the Bluetooth speaker automatically pauses the
play, short press the play/ pause button to answer the call, And then short press the
play/ pause button To hang up the call, (Double-Click the play/pause button to call back
the last call )the music will be played automatically after the call.
4. AUX-IN mode: Insert a Φ3.5 stereo plug switch to AUX input mode automatically.
5. TF card mode: Insert a TF card and automatically switch to TF card mode.
Operation Guide:
Product Description:
Interface & Function Description:
Music input mode
TF Card, Bluetooth ,Aux in
TF card Max support up to 64GB
Bluetooth version V5.0
Bluetooth Play distance ≥10m (30feet)
Battery Li-ion 3.7V 3000mAh
Charging power input DC5V,800mA
Output Power RMS 15W
Frequency Response 80HZ-20KHZ
S/N Ratio 80dB
Driver 1.75”x2 + passive basin x2
Impedance 4Ω
Control way Press Buttons
◆Do not put this product in a high temperature and humid environment,
please put it in a ventilated and dry place.
◆If metal objects or liquid are spilled into the product accidentally,should
be cut off the power supply immediately and the product can be used
after inspection by a professional.
◆Do not open the product shell at will to prevent other accidents. If you
need to repair, please contact our company's after-sales service to help.
◆ Any modification or disassembled of this equipment without permission
will lose the right to enjoy the after-sales service.
Battery Warning:
-The device is equipped with an integrated lithium battery, the battery cannot
be replaced.do not attempt to remove the battery from the device.
-Do not dispose of in fire or expose to excessive heat.
-Do not Crush,puncture.incinerate. Or short circuit external contacts.
-Please recycle or dispose of the battery properly
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions: 1) this device may not cause harmful interference, and 2)
this device must accept any interference received, including interference that may
cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Radiation Exposure Statement
This device complies with RF radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
FCC Statement