Installation guide

Wireless ADSL Modem User’s Manual 18
Check your TCP/IP protocol
After configuring the TCP/IP protocol, you can use the ping command to check if your
computer has successfully connected to this Router. The following example shows the
ping procedure for Windows 98.
First, execute the ping command in MS-DOS Command prompt.
Ping 10.0.0.2
If the following messages appear:
 Pinging 10.0.0.2 with 32 bytes of data:
 Reply from 10.0.0.2 : bytes=32 times<10ms TTL=64
 Reply from 10.0.0.2 : bytes=32 times<10ms TTL=64
 Reply from 10.0.0.2 : bytes=32 times<10ms TTL=64
A communication link between your computer and this Router has been successfully
established. Otherwise, if you get the following messages,
 Pinging 10.0.0.2 with 32 bytes of data:
 Request timed out.
 Request timed out.
 Request timed out.
There must be something wrong in configuring procedure or cable issue. Please check the
LAN LINK LED must be lighted. Or check TCP/IP configuration of your computer.