Product specifications

CDM-800 Gateway Router Revision 1
Rear Panel Connections MN-CDM800
3–9
3.2.4.4 ‘CONSOLE’ Interface Connector
ConnectorType Name Direction
Type‘D’9‐pinmale
CONSOLE In/Out

ThisinterfaceisusedforEIA‐232communications.Itisintendedforconnectiontoan
M&CcomputerorVT(VideoTerminal)device.
Table 3-2. CONSOLE Connector Pinout
Pin# Description Direction
1
GROUND –
6
RESERVED‐DONOTCONNECTTOTHISPIN –
2
EIA‐232TRANSMITDATA OUT
7
RESERVED‐DONOTCONNECTTOTHISPIN –
3
EIA‐232RECEIVE DATA IN
8
RESERVED‐DONOTCONNECTTOTHISPIN –
4
RESERVED‐DONOTCONNECTTOTHISPIN –
9
RESERVED‐DONOTCONNECTTOTHISPIN –
5
GROUND –
3.2.5 ‘(EXTERNAL) REFERENCE IN/OUT’ Connector







This interface is used for phase‐locking the internal 10MHz reference oscillator. It
allowsselectableinputof1,2,5or10MHzoranoutputof10MHz.Theimpedance
ismatchedfor50
Ω ,andrequiresalevelintherangeof0dBmto+10dBm±3dB.


ConnectorType NameDirection
BNC ReferenceIn/Out In/Out