Product specifications

CDM-800 Gateway Router Revision 1
Updating Firmware MN-CDM800
4–2
(Left) Standard CDM-800 115V/230V AC Unit
(Right) Optional CDM-800 48V DC Unit
4.2 Getting Started: Preparing for the Firmware Download
1. First,identifytheCDM‐800assignedManagementIPAddress,andthefirmwarenumber/
revisionletter/version number. 

User‐supplieditemsneeded:

• AMicrosoftWindows‐basedPC,equippedwithavailableserialandEthernetports;a
compatibleWebbrowser(e.g.,InternetExplorer);andaterminalemulatorprogram
(e.g.,TeraTermorHyperTerminal).

• A9‐pinserialcabletocon
ne
ctthePCtotheCDM‐800.

A. Usethe9‐pinserialcabletoconnectthe
CDM‐800‘CONSOLE’porttoaserialport
ontheuserPC.





B. OnthePC:Opentheterminalemulatorprogram.

Refer to your te
rminal emulator pro
gram HELP feature or user guide for
operatingandconfigurationinstructions.
Configuretheutilityprogramserialportcommunicationandterminaldisplayoperation:

• 38400bps(BaudRate) • 8DataBits • 1 StopBit
• Parity=NO • PortFlowControl=NONE • DisplayNewlineRx/Tx:CR
• LocalEcho=ON


C. OntheCDM‐800:Turnonthepower.







D. OnthePC:ReviewandrecordtheinformationdisplayedontheCDM‐800Command
LineInterface(CLI):

• ManagementIPAddress(e.g.,defaultis192.168.1.10/24)
• FirmwareNumberandRevisionLetter(e.g.,FW‐0000430J)
• FirmwareReleaseVersion(e.g.,1.3.2)