Product specifications

CDM-800 Gateway Router Revision 1
Ethernet-based Remote Product Management MN-CDM800
5–24
• Description–Enteralabelstringinthistextbox.Thislabelhelps tomaintainthenetwork.
Theassignednamemustbeuniqueandcannotcontainanywhitespace.

• Dest.IP/Mask–EnteraDestinationIPAddress/MaskintheformXXX.XXX.XXX.XXX/YY.
Multicastaddressesmusthaveasubnetof32.
• Interf.–Usethedrop‐down
menutoselecttheInterfaceastoWANortoLAN.

• Next Hop IP – Enter the desired Next Hop IP Address for toLAN routes. Note thatno Next
HopentryisneededfortoWANroutes.

• WAN Label – This label allows traffic to a defined remote designation to be passed. The
validlabelra
ngeisfrom1to2047.

• If th
e WAN Label does not match any of the WAN Labels define d  in the
CDM‐840 Remote Router, and then the packets will be dropped by the
CDM‐840.

• Thelabelwillbeforcedto0forMulticastaddresses.AuniqueWANLabelfor
each remote  CDM‐840 is required fo
r corre
ct network operation. If the
remoteunitshavethesameWANLabel,thenmultipleCDM‐840swillreceive
the same packet This can  cause duplicate packets in the network as well as
unnecessary packet processing, which can reduce the available processing
resourcesforpacketsactuallydestinedtoagivenre
moteCDM‐840.

• HeaderComp.–Usethedrop‐downmenutoDisableorEnableoperationsforpacketsthat
matchonthisroute.

• PayloadComp.–Usethedrop‐downmenutoDisabl
eorEnableoperationsforpacketsthat
matchonthisroute.

Enterthedesiredinformation. Click[AddEntry]whendone.Theindexautomaticallyincrements
tothenexta vailablenumberwhenthenewrouteisadded.
Delete Route
Enter the Route Index to Delete. Click [Delete Entry] when done. This deletes the specified
routeentryfromtheroutetable.
Route Table (Edit)
Use the text boxes and drop‐down menus to edit all current Route Table entries, as described
previouslyfortheAddNewRoutesection.

Click[SubmitChanges]tosavethesesettings.