Product specifications

CDM-800 Gateway Router Revision 1
Ethernet-based Remote Product Management MN-CDM800
5–25
5.4.4.3.5 Configuration | Compression


Use the ‘Configuration | Routing | Routes’ page (Sect. 5.4.4.3.4) to enable or
disableHeaderandPayloadCompressionoperation.

Use this page to configure the optio nal Payload and Header Compression FAST feature, if
installed.


Figure5‐14.Configuration|Compressionpage
Refresh Rates
• Header Compression for UDP – Enter the User Datagram Protocol refresh rate, from 1 to
600packets,or1second(whichevercomesfirst).

• Header Compression for RTP – Enter the Real Tim e Protocol refresh rate, from 1 to 600
packets,or1second(whichevercomesfirst).

• HeaderCo
mpressionfo
rallothers–Enterthedefaultprotocolrefreshrate,from1to600
packets,or1second(whichevercomesfirst).

• PayloadCompression–EnterthePayloadCompressionrefreshrate,from1to600packets,
or1second(whichevercomesfirst). 

SetthedesiredCompressionconfigurations.Click[Submit]tosave.