Installation manual

THIS DOCUMENT IS THE PROPERTY OF XICOM TECHNOLOGY. REPRODUCTION OR RELEASE WITHOUT EXPRESS PERMISSION IS STRICTLY PROHIBITED.
XTRD-400K, 400W, SNG
Document No. 305-0062-301 REV C Page 5 of 10
3.1.19 Monitoring
3.1.19.1 Monitoring, local
3.1.19.1.1 Front Panel LEDs
3.1.19.1.1.1 Power Color = Green
3.1.19.1.1.2 FTD Color = Amber 3 minutes min
3.1.19.1.1.3 Standby Color = Amber
3.1.19.1.1.4 HV On Color = Green
3.1.19.1.1.5 Htr Standby Color = Amber
3.1.19.1.1.6 Local Color = Green
3.1.19.1.1.7 Remote Color = Green
3.1.19.1.1.8 Summary Fault Color = Red
3.1.19.2 Operator Interface 4-line display, front panel
3.1.19.3 Summary Fault QTY 2, Auxiliary connector
3.1.19.4 Monitors, local and remote
Function
3.1.19.4.1 Power Out
3.1.19.4.2 Reflected Power
3.1.19.4.3 TWT Temperature
3.1.19.4.4 Helix Current
3.1.19.4.5 Helix Voltage
3.1.19.4.6 Heater Hours
3.1.19.4.7 Beam Hours
3.1.19.4.8 High VSWR Fault
3.1.19.4.9 High Voltage Fault
3.1.19.4.10 Helix Current Fault
3.1.19.4.11 TWT Temperature Fault
3.1.19.4.12 Summary Fault
EAR EXPORT CONTROLLED: The information contained in this Manual refers or relates to a product that is subject
to the U.S. Export Administration Regulations (EAR). Transfer of data herein by any means to a Foreign Person,
whether in the U.S. or abroad, may require an export license from the U.S. Department of Commerce.