Installation manual

MNC-0400-001 20 of 54 REV H
Operation, Rack and Digital HPAs
There are five setup menus, Setup Menu 1, Setup Menu 2,
Setup Menu 3, Setup Menu 4, and Setup Menu 5. A special
function key [Setup] is used to access the setup menus. Two
keys, [Enable]+[Setup], are pressed to access the Setup
Menus when [Enable] is set to ON.
Setup Menu 1
Setup Menu 1, Figure 8 is an intermediate menu. All four
softkeys of the Setup 1 Menu are active. The Setup 1 Menu
softkey functions are:
[Softkey 1]—Pressed to access the Default 1 Menu
[Softkey 2]—Pressed to access the Alarms/Faults Menu.
[Softkey 3]—Pressed to access the Test Menu.
[Softkey 4]—Pressed to access Setup Menu 2.
Figure 8, Setup Menu 1
Default Menus
There are two default menus, Figure 9 that allow you to set the
default parameters for the amplifier. Default Menu 2 is accessed
from Default Menu 1.
Default Menu 1
The functions controlled by the Default 1 Menu are listed in the
menu. All four softkeys are active. The Default 1 Menu softkey
functions are:
EAR EXPORT CONTROLLED: The information contained in this Manual refers or relates to a product that is subject
to the U.S. Export Administration Regulations (EAR). Transfer of data herein by any means to a Foreign Person,
whether in the U.S. or abroad, may require an export license from the U.S. Department of Commerce.