Installation manual

MNC-0400-001 34 of 54 REV H
Operation, Rack and Digital HPAs
Figure 13, Setup Menu 4
Configure COM1 Menu
Three softkeys are active:
[Softkey 1]—Sets the serial port baud rate. Cycles one step
each time the [Softkey 1] is pressed. The step sequence is:
[Softkey 2]—Sets parity. Cycles one step each time [Softkey 2]
key is pressed. The step sequence is:
None Even Odd None etc.
[Softkey 3]—Sets the data stop bits. Toggles between 8/1 and 7/
2.
Press Enter to return to Menu 4.
1200 2400 4800 9600 19.2 38.4 57.6 1200,
etc.
EAR EXPORT CONTROLLED: The information contained in this Manual refers or relates to a product that is subject
to the U.S. Export Administration Regulations (EAR). Transfer of data herein by any means to a Foreign Person,
whether in the U.S. or abroad, may require an export license from the U.S. Department of Commerce.