Product specifications

KPA Ku-Band Indoor Solid-State Power Amplifier Revision 1
Front Panel Operation MN/KPA.IOM
5–15
If Clear-All is selected:
Clear All Stored Events:
No Yes (◄ ► E)
Choose No or Yes using the ◄ ► arrow keys, then press ENTER. If Yes is selected, the
stored events log is cleared, and the user is taken directly back to the previous menu.
5.3.2.3 MONITOR: Power
Forward Power: <19.0 dBm
Reverse Power: <12.0 dBm
5.3.2.4 MONITOR: Vltgs
+15V=14.6 +7.5V=7.9
+5V=5.0 -5V=-5.0 (E)
5.3.2.5 MONITOR: PS (Power Supply)
28VDC PS = 27.2
RF Power Supply = 9.1
5.3.2.6 MONITOR: Temp
Amplifier Temp = 45 C
5.3.2.7 MONITOR: FETs
RF FET Q01 : 20mA
RF FET Q02 : 72mA (▲ ▼)
The user may scroll backwards or forwards through the displayed RF Power Field Effect
Transistors (FETs) by using the ▲ ▼ arrow keys.
Note the following:
• For KPA-040 only – RF FET Q01 through Q14.
• For KPA-020IN/-080/-100 – RF FET Q01 through Q27.
5.3.3 SELECT: Utility
UTILITY: Date/Time CID
PowerMon Firmware RefOsc
Select Date/Time, CID, PowerMon, Firmware, or RefOsc using the ◄ ► arrow keys,
then press ENTER.