CiM-25/600 IP-Enabled M&C Installation and Operation Manual Part Number CD/CIM25600.IOM Rev.
Errata A Comtech EF Data Documentation Update Subject: Revise Paragraph 2.3.1 Powering the CiM-25 Date: Part Number: Related Document: July 9, 2004 Collating Instructions: Attach to Page 4 CD/CIM25550.IOM CiM-25/550,IP-Enabled M&C,Installation and Operation Manual Part Number CD/CIM25550.IOM,Rev. 2 Comments: This information will be incorporated into the next revision. Change Specifics: 2.3.
CiM-25/600 Comtech EF Data is an ISO 9001 Registered Company. IP Enabled M&C Installation and Operation Manual Part Number CD/CIM25600.IOM Rev. 3 May 13, 2004 Copyright © Comtech EF Data, 2001. All rights reserved. Printed in the USA. Comtech EF Data, 2114 West 7th Street, Tempe, Arizona 85281 USA, (480) 333-2200, FAX: (480) 333-2161.
CiM-25/600 IP Enabled M&C Preface Rev. 3 CD/CIM25600.IOM CUSTOMER SUPPORT Contact the Comtech EF Data Customer Support Department for: Product support or training Information on upgrading or returning a product Reporting comments or suggestions concerning manuals A Customer Support representative may be reached at: Comtech EF Data Attention: Customer Support Department 2114 West 7th Street Tempe, Arizona 85281 USA 480.333.2200 (Main Comtech EF Data Number) 480.333.4357 (Customer Support Desk) 480.333.
Table of Contents Customer Support......................................................................................................................... ii FIGURES .......................................................................................................................IX About this Manual ........................................................................................................................ x Conventions and References .......................................................
CiM-25/600 IP Enabled M&C Preface CHAPTER 3. 3.1 Rev. 3 CD/CIM25600.IOM OPERATION.......................................................................................... 7 Overview ............................................................................................................................ 7 3.2 Administration and Security............................................................................................ 7 3.2.1 Security Tools ..................................................
CiM-25/600 IP Enabled M&C Preface A.5.3 A.5.4 A.5.5 A.5.6 A.5.7 A.5.8 A.5.9 A.5.10 A.5.11 A.5.12 A.5.13 A.5.14 A.5.15 A.5.16 A.5.17 A.5.18 A.5.19 A.5.20 A.5.21 A.5.22 A.5.23 A.5.24 A.5.25 A.5.26 A.5.27 A.5.28 A.5.29 A.5.30 A.5.31 A.5.32 A.5.33 A.5.34 A.6 Rev. 3 CD/CIM25600.IOM dod............................................................................................................................. 48 internet ..........................................................................................
CiM-25/600 IP Enabled M&C Preface A.7.11 A.7.12 A.7.13 A.7.14 A.7.15 A.7.16 A.7.17 A.7.18 A.7.19 A.7.20 A.7.21 A.7.22 A.7.23 A.7.24 A.7.25 A.7.26 A.7.27 A.7.28 A.7.29 A.7.30 A.7.31 A.7.32 A.7.33 A.7.34 A.7.35 A.7.36 A.7.37 A.7.38 A.7.39 A.7.40 A.7.41 A.7.42 A.7.43 A.7.44 A.7.45 A.7.46 A.7.47 A.7.48 A.7.49 A.7.50 A.7.51 A.7.52 A.7.53 A.7.54 A.7.55 Rev. 3 CD/CIM25600.IOM equipmentID .............................................................................................................
CiM-25/600 IP Enabled M&C Preface A.7.56 A.7.57 A.7.58 A.7.59 A.7.60 A.7.61 A.7.62 A.7.63 A.7.64 A.7.65 A.7.66 A.7.67 A.7.68 A.7.69 A.7.70 A.7.71 A.7.72 A.7.73 A.7.74 A.7.75 A.7.76 A.7.77 A.7.78 A.7.79 A.7.80 A.7.81 A.7.82 A.7.83 A.7.84 A.7.85 A.7.86 A.7.87 A.7.88 A.7.89 A.7.90 A.7.91 A.7.92 A.7.93 A.7.94 A.7.95 A.7.96 A.7.97 A.7.98 A.7.99 A.7.100 Rev. 3 CD/CIM25600.IOM idrTxESCType .......................................................................................................... 99 idrRxESCType.
CiM-25/600 IP Enabled M&C Preface A.7.101 A.7.102 A.7.103 A.7.104 A.7.105 A.7.106 A.7.107 A.7.108 A.7.109 A.7.110 A.7.111 A.7.112 A.7.113 A.7.114 A.7.115 A.7.116 A.7.117 A.7.118 A.7.119 A.7.120 A.7.121 A.7.122 A.7.123 A.7.124 A.7.125 A.7.126 A.7.127 A.7.128 A.7.129 A.7.130 A.7.131 A.7.132 A.7.133 A.7.134 A.7.135 A.7.136 A.7.137 A.7.138 A.7.139 A.7.140 A.7.141 A.7.142 A.7.143 A.7.144 A.7.145 Rev. 3 CD/CIM25600.IOM oduSystemInfo ..............................................................................
CiM-25/600 IP Enabled M&C Preface A.7.146 A.7.147 A.7.148 A.7.149 A.7.150 A.7.151 A.7.152 A.7.153 A.7.154 A.7.155 A.7.156 A.7.157 A.7.158 A.7.159 A.7.160 A.7.161 A.7.162 A.7.163 A.7.164 A.7.165 A.7.166 A.7.167 A.7.168 A.7.169 A.7.170 A.7.171 A.7.172 Rev. 3 CD/CIM25600.IOM kstFirmwareNumbers.......................................................................................... 146 kstUnitParameters ...............................................................................................
CiM-25/600 IP Enabled M&C Preface Rev. 3 CD/CIM25600.IOM ABOUT THIS MANUAL This manual provides installation and operation information for the Comtech EF Data CiM-25/600 IP Enabled M&C. This is a technical document intended for earth station engineers, technicians, and operators responsible for the operation and maintenance of the CiM-25/600 IP Enabled M&C. CONVENTIONS AND REFERENCES CAUTIONS AND WARNINGS Indicates information critical for proper equipment function.
CiM-25/600 IP Enabled M&C Preface Rev. 3 CD/CIM25600.IOM REPORTING COMMENTS OR SUGGESTIONS CONCERNING THIS MANUAL Comments and suggestions regarding the content and design of this manual will be appreciated. To submit comments, please contact the Comtech EF Data Customer Support Department. EMC COMPLIANCE This is a Class A product. In a domestic environment, it may cause radio interference that requires the user to take adequate protection measures.
CiM-25/600 IP Enabled M&C Preface Rev. 3 CD/CIM25600.IOM SAFETY COMPLIANCE EN 60950 Applicable testing is routinely performed as a condition of manufacturing on all units to ensure compliance with safety requirements of EN60950. This equipment meets the Safety of Information Technology Equipment specification as defined in EN60950.
CiM-25/600 IP Enabled M&C Preface Rev. 3 CD/CIM25600.IOM WARRANTY POLICY This Comtech EF Data product is warranted against defects in material and workmanship for a period of two years from the date of shipment. During the warranty period, Comtech EF Data will, at its option, repair or replace products that prove to be defective. For equipment under warranty, the customer is responsible for freight to Comtech EF Data and all related customs, taxes, tariffs, insurance, etc.
Chapter 1. INTRODUCTION CiM-25 IP-Enabled M&C Interface 1.1 INTRODUCTION The CiM-25 is a low-cost solution for providing an Internet Protocol (IP) Monitor and Control (M&C) interface for existing Comtech EF Data satellite modems, RF frequency converters and solid-state power amplifiers. The CiM-25 provides a custom proxy interface between the IP world and the equipment’s existing serial remote control interface.
CiM-25/600 IP Enabled M&C Introduction Rev. 3 CD/CIM25600.IOM The CiM-25 uses flash technology providing support for a wide variety of products from a single hardware platform.
Chapter 2. INSTALLATION 2.1 UNPACKING AND INSPECTION Inspect shipping containers for damage. If shipping containers are damaged, keep them until the contents of the shipment have been carefully inspected and checked for normal operation. Remove the packing list from the outside of the shipping carton. Open the carton and remove the contents, checking the contents against the packing list. Verify completeness of the shipment and that the unit functions correctly.
CiM-25/600 IP Enabled M&C Introduction 2.3 Rev. 3 CD/CIM25600.IOM CONNECTING CIM-25 TO EQUIPMENT The CiM-25 is designed to connect directly (no cabling) to supported Comtech EF Data Modems, Frequency Converters, or Solid State Power Amplifiers using the equipment’s 9-pin remote control interface port. The CiM-25 interfaces to this equipment via a RS232 interface at a baud rate of 19200 bps and a data format of 8-N-1.
CiM-25/600 IP Enabled M&C Introduction Rev. 3 CD/CIM25600.
CiM-25/600 IP Enabled M&C Introduction Rev. 3 CD/CIM25600.
Chapter 3. OPERATION 3.1 OVERVIEW Each CiM-25 unit is programmed in the factory to provide a custom proxy interface to Comtech EF Data’s previously defined equipment. This means that a CiM-25/600 that is loaded to interface a CDM-600 Modem to the IP world will not operate with any other piece of Comtech EF Data equipment, unless the personality is changed via a flash upload. However, every CiM-25, independent of personality, shares a large number of common features.
CiM-25/600 IP Enabled M&C SNMP Interface 3.2.1 3.2.1.1 Rev. 3 CD/CIM25600.IOM SECURITY TOOLS USER LOGIN For the HTTP interfaces the CiM-25 provides three (3) levels of user login. The Telnet interface provides the first two (2) of the following levels. The highest level is the Administrator login. This level allows 100% complete access to all controllable CiM-25 and equipment parameters. The next level of user login is the Read/Write level.
CiM-25/600 IP Enabled M&C SNMP Interface 3.2.2 Rev. 3 CD/CIM25600.IOM NETWORK ADMINISTRATION The CiM-25 also provides the following network administration facilities: Configure IP Address, IP Gateway, and IP Mask. Select Primary and Secondary DNS server IP addresses. Select SMTP domain Name and IP address. Select SNMP Trap IP addresses.
CiM-25/600 IP Enabled M&C SNMP Interface 3.3 Rev. 3 CD/CIM25600.IOM HTTP INTERFACE This section explains the HTTP (Web Server) interface provided by the CiM-25/600. 3.3.1 LOCAL LAN CONFIGURATION The web page interface is best viewed at 1152 x 864 resolution using Internet Explorer 5.5 or higher and a 17” or larger monitor. 3.3.1.1 HTTP 1.1 For best performance, HTTP 1.1 should be disabled. It can be changed as follows: IMPORTANT Step Procedure Example 1.
CiM-25/600 IP Enabled M&C SNMP Interface 3.3.1.2 Rev. 3 CD/CIM25600.IOM PROXY SERVER If your network uses a proxy server, it may be necessary to disable the use of it for the browser to work. It can be changed as follows: IMPORTANT Step Procedure 1. Click Start, Settings, then Control Panel. 2. Double-click the Internet Options icon in the Control Panel. 3. Under the Connections tab, click the LAN Settings button. 4. Example At this point you must do one of the following: a.
CiM-25/600 IP Enabled M&C SNMP Interface Step Procedure 5. In the Exceptions box, enter the IP address of the CiM module and click OK. Rev. 3 CD/CIM25600.
CiM-25/600 IP Enabled M&C SNMP Interface 3.3.2 Rev. 3 CD/CIM25600.IOM HOME PAGE Welcome to the CiM-25/600 Web Interface. The following sections will give you a brief introduction to each web page available.
CiM-25/600 IP Enabled M&C SNMP Interface 3.3.3 Rev. 3 CD/CIM25600.IOM LOGOFF PAGE The CiM-25 allows multiple connections to the Web Interface. The Web Interface and Telnet Interface cannot be used at the same time.You must logoff the Web Interface in order to log into the Telnet Interface and vice versa.
CiM-25/600 IP Enabled M&C SNMP Interface 3.3.4 Rev. 3 CD/CIM25600.IOM SUPPORT PAGE (COMMON) In order to use the Support functions, the user must first assign SMTP a domain name and IP address. Refer to 3.3.5.8, SMTP Domain Name and IP Address. IMPORTANT The Support page is accessible by ALL logged in users. This page allows the user to automatically email Comtech EF Data’s Customer Support center. The user MUST fill in the Name, Company, Email Address, and Telephone information boxes.
CiM-25/600 IP Enabled M&C SNMP Interface 3.3.5 Rev. 3 CD/CIM25600.IOM ADMINISTRATION PAGE (COMMON) The Administration Page is only available to users who have logged in using the Administrator Name and Password. 3.3.5.1 ADMINISTRATOR NAME AND PASSWORD The factory defaults for these parameters are admin and 1234 respectively. The Name field can be any alpha-numeric combination with a minimum length of 4 characters and a maximum length of 10 characters.
CiM-25/600 IP Enabled M&C SNMP Interface 3.3.5.2 Rev. 3 CD/CIM25600.IOM READ/WRITE NAME AND PASSWORD The factory defaults for these parameters are opcenter and 1234 respectively. The Name field can be any alpha-numeric combination with a minimum length of 4 characters and a maximum length of 10 characters. The Password field can be any alpha-numeric combination with a minimum length of 4 characters and a maximum length of 10 characters. 3.3.5.
CiM-25/600 IP Enabled M&C SNMP Interface 3.3.5.8 Rev. 3 CD/CIM25600.IOM SMTP DOMAIN NAME AND IP ADDRESS The Administrator can assign the SMTP Domain Name and Domain IP Address. This is required if the email feature of the Support Page is to be used. 3.3.5.9 SNMP TRAP IP ADDRESS The Administrator can assign up to two SNMP Trap IP addresses. 3.3.5.10 MAC ADDRESS This is a READ ONLY parameter and cannot be changed. 3.3.5.11 SNMP TRAP COMMUNITY The Administrator can assign a SNMP Trap Community.
CiM-25/600 IP Enabled M&C SNMP Interface 3.3.6 Rev. 3 CD/CIM25600.IOM MODEM CONFIGURATION PAGE (RX/TX) This page can be viewed by all three levels of user login. However, only a user with Administrative or Read/Write privileges can submit changes to this page. This page allows the user to configure the primary Transmit and Receive Parameters of a CDM-600 Modem.
CiM-25/600 IP Enabled M&C SNMP Interface 3.3.7 Rev. 3 CD/CIM25600.IOM STATUS PAGE This page can be viewed by all three levels of user login. This is a Read Only Page and has no submit button. This page provides various status information for a CDM-600 Modem.
CiM-25/600 IP Enabled M&C SNMP Interface 3.3.8 Rev. 3 CD/CIM25600.IOM INTERFACE PARAMETERS PAGE (TX/RX) This page can be viewed by all three levels of user login. However, only a user with Administrative or Read/Write privileges can submit changes to this page. This page allows the user to configure the Transmit and Receive Interface Parameters and Drop & Insert parameters of a CDM-600 Modem.
CiM-25/600 IP Enabled M&C SNMP Interface 3.3.9 Rev. 3 CD/CIM25600.IOM UTILITIES PAGE This page can be viewed by all three levels of user login. However, only a user with Administrative or Read/Write privileges can submit changes to this page. This page allows the user to configure various utility functions on a CDM-600 Modem.
CiM-25/600 IP Enabled M&C SNMP Interface 3.3.10 Rev. 3 CD/CIM25600.IOM STORED FAULTS/ALARMS This page can be viewed by all three levels of user login. This is a Read/Write page. This page allows the user to Read/Clear Events Log, Statistics Log, and configure Alarm Masks of the CDM-600 Modem.
CiM-25/600 IP Enabled M&C SNMP Interface 3.3.11 Rev. 3 CD/CIM25600.IOM CSAT-5060 AND KST-2000A/B ODU PAGES The CiM-25/600 IP Module can function with CSAT ODU firmware version 2.18 or higher and KST-2000A/B ODU. All ODU pages are accessible only when ODU COMM on the Utilities-Unit page is set to ENABLED. Note: The same three menu options on the left side of the screen capture work for both CSAT and KST ODU. The correct page will be brought out for the correct ODU when the ODU menu is clicked. 3.3.11.
CiM-25/600 IP Enabled M&C SNMP Interface 3.3.11.2 Rev. 3 CD/CIM25600.IOM CSAT-5060 ODU STATUS PAGE This page can be viewed by all three levels of user login. This is a Read Only Page and has no submit button for the Status Information. This page provides various status information for a CSAT-5060 ODU. Note: If redundant ODUs are used, the page can be toggled between the Online and Offline units by selecting ODU #1 or ODU #2 in the ODU Selection box and clicking Submit.
CiM-25/600 IP Enabled M&C SNMP Interface 3.3.11.3 Rev. 3 CD/CIM25600.IOM CSAT-5060 ODU UTILITIES PAGE This page can be viewed by all three levels of user login. However, only a user with Administrative or Read/Write privileges can submit changes to this page. The user can perform various utility functions on a CSAT-5060 ODU from this page.
CiM-25/600 IP Enabled M&C SNMP Interface Rev. 3 CD/CIM25600.IOM 3.3.11.4 KST-2000A/B ODU CONFIGURATION PAGE This page can be viewed by all three levels of user login. However, only a user with Administrative or Read/Write privileges can submit changes to this page. This page is used to configure the unit parameters, and the primary Transmit and Receive parameters of a KST-2000A/B ODU.
CiM-25/600 IP Enabled M&C SNMP Interface Rev. 3 CD/CIM25600.IOM 3.3.11.5 KST-2000A/B STATUS PAGE This page can be viewed by all three levels of user login. However, only a user with Administrative or Read/Write privileges can submit changes to this page. This page provides fault status for a KST-2000A/B ODU.
CiM-25/600 IP Enabled M&C SNMP Interface Rev. 3 CD/CIM25600.IOM 3.3.11.6 KST-2000A/B UTILITIES PAGE This page can be viewed by all three levels of user login. However, only a user with Administrative or Read/Write privileges can submit changes to this page. This page provides the firmware number and version, the assembly number and the serial number information of different modules of a KST-2000A/B ODU.
CiM-25/600 IP Enabled M&C SNMP Interface 3.4 Rev. 3 CD/CIM25600.IOM SNMP INTERFACE CiM-25 supports v2c of the industry standard SNMP (Simple Network Management Protocol). CiM-25 supports a complete private MIB for the attached equipment as well as a private MIB for the CiM-25 itself. The SNMP interface supports standard Get and Set as well as Branch Walking. The image above is a screen capture of the CiM-25 MIB structure using a common MIB Browser.
CiM-25/600 IP Enabled M&C SNMP Interface Rev. 3 CD/CIM25600.IOM The image below is a screen capture of the CDM-600 MIB using a common MIB Browser. The important point here is that all CDM-600 Controllable Parameters and Status Parameters, Events, and Statistics Log are available in its private CDM-600 MIB.
CiM-25/600 IP Enabled M&C SNMP Interface Rev. 3 CD/CIM25600.IOM The image below is a screen capture of the CDM-600 MIB using a common MIB Browser. The important point here is that all CSAT ODU Controllable Parameters and Status Parameters, Events, and Statistics Log are available in its private CDM-600 MIB.
CiM-25/600 IP Enabled M&C SNMP Interface Rev. 3 CD/CIM25600.IOM The image below is a screen capture of the CDM-600 MIB using a common MIB Browser. The important point here is that all KST-2000A/B ODU Controllable Parameters and Status Parameters, Events, and Statistics Logs are available in its private CDM-600 MIB.
CiM-25/600 IP Enabled M&C SNMP Interface 3.5 Rev. 3 CD/CIM25600.IOM TELNET INTERFACE The CiM-25 provides a Telnet interface for three primary functions: System Administration. Equipment M&C via the standard equipment Remote Control protocol. Equipment M&C via Comtech EF Data PC based Monitor and Control applications. The Telnet interface uses two (2) levels of user login, Administrator and Read/Write. The screen capture below shows the login process.
CiM-25/600 IP Enabled M&C SNMP Interface Rev. 3 CD/CIM25600.IOM 3.5.1 TELNET ADMINISTRATIVE FUNCTIONS 3.5.1.1 CHANGE IP ADDRESS, GATEWAY AND MASK Using the !IP command, the Administrator can change the IP Address, IP Gateway, and IP Mask. The command protocol is as follows: Format: !IP Example: !IP 10.6.30.2 10.6.30.255 255.255.0.0 Query Format: Response: !IP ? !IP 10.6.30.2 10.6.30.255 255.255.0.
CiM-25/600 IP Enabled M&C SNMP Interface Rev. 3 CD/CIM25600.IOM 3.5.1.2 CHANGE HOST ALLOW LIST Using the !HA command, the Administrator can modify the Host Allow List. The command protocol is as follows: Format: Where: !HA
address index is 1 to 6, ranged is 0 if No and 1 if yes Example: !HA 5 10.50.91.200 0 This sets IP address #5 to 10.50.91.200 and indicates addresses #5 & #6 are NOT ranged. Query Format: Response: Note: !HA ? IP 1: 000.000.000.000 IP 3: 000.CiM-25/600 IP Enabled M&C SNMP Interface Rev. 3 CD/CIM25600.IOM 3.5.1.5 CHANGE READ/WRITE NAME Using the !WN command, the Administrator can change the Read/Write login Name. The command protocol is as follows: Format: Where: !WN can be any alphanumeric string of 4 to 10 characters in length Query Format: Response: !WN ? !WN Note: Changes made via this command do not become active until the user has sent a !EE command to commit the changes to EEPROM of the CiM-25. 3.5.1.
CiM-25/600 IP Enabled M&C SNMP Interface Rev. 3 CD/CIM25600.IOM 3.5.1.8 CHANGE READ ONLY PASSWORD Using the !RP command, the Administrator can change the Read/Only login Password. The command protocol is as follows: Format: Where: !RP can be any alphanumeric string of 4 to 10 characters in length Query Format: Response: !RP ? !RP Note: Changes made via this command do not become active until the user has sent a !EE command to commit the changes to EEPROM of the CiM-25. 3.
CiM-25/600 IP Enabled M&C SNMP Interface Rev. 3 CD/CIM25600.IOM 3.5.1.11 CHANGE PRIMARY/SECONDARY DNS IP ADDRESSES Using the !DN command, the Administrator can set the primary and secondary DNS IP Addresses.
CiM-25/600 IP Enabled M&C SNMP Interface Rev. 3 CD/CIM25600.IOM 3.5.1.14 CHANGE HTTP PORT Using the !PT command, the Administrator can set the HTTP Port. The command protocol is as follows: Format: !PT Response: Command Successful Where can be any number in the range of 0 to 65535 Query Format: Response: !PT ? !PT 1. The default port is set to 80. Notes: 2.
CiM-25/600 IP Enabled M&C SNMP Interface Rev. 3 CD/CIM25600.IOM 3.5.2 USING TELNET WITH EQUIPMENT REMOTE CONTROL PROTOCOL The CiM-25/600 Telnet interface will accept any command defined in the particular interfacing equipment Remote Control Specification. See the equipment Operation Manual for details regarding the available commands and the message protocol.
CiM-25/600 IP Enabled M&C SNMP Interface Rev. 3 CD/CIM25600.IOM 3.6 MAINTENANCE INTERFACE The default network configuration settings are: IP: 10.6.30.1 Admin Name: admin Admin Password: 1234 The CiM-25 has been designed to allow a user to reset the unit back to the factory default settings, change the IP Address, and verify the software version. Use the following procedure to make these changes.
CiM-25/600 IP Enabled M&C SNMP Interface Rev. 3 CD/CIM25600.IOM 3.6.1 RESETTING TO FACTORY DEFAULTS 1 Enter the following command: Command: <0/RST=’cr’ Response: >0/RST= 3.6.2 CHANGING NETWORK IP ADDRESS Perform the following steps. 1 Enter the following command: Command: <0/IPA=xxx.xxx.xxx.xxx/yy’cr’ Where x is the IP Address and y is the subnet mask. Response: >0/IPA= Example: <0/IPA=192.168.001.002/16’cr’ 16 would be a subnet mask of 255.255.0.
CiM-25/600 IP Enabled M&C SNMP Interface Rev. 3 CD/CIM25600.IOM 3.6.5 CHANGING SERIAL NUMBER Perform the following: 1 Enter the following command: Command: <0/SNM=xxxxxxxxx’cr’ Where x is the Serial Number as shown on the label of the CiM-25. 2 Response: >0/SNM= Example: >0/SNM=022080125A’cr’ To query the Serial Number enter: >0/SNM?’cr’ The Serial Number is unique to this unit. Change only under factory direction or if it does not match the label.
CiM-25/600 IP Enabled M&C SNMP Interface Rev. 3 CD/CIM25600.IOM Appendix A. CiM-25/600 SNMP Interface A.1 SNMP INTERFACE The Simple Network Management Protocol (SNMP) is an application-layer protocol designed to facilitate the exchange of management information between network devices. The CiM-25/600 SNMP agent supports SNMP v2c. A.2 MIB-II The CiM-25/600 agent implements RFC 1213, Management Information Base for Network Management of TCP/IP-based Internets. This is known as “MIB-II support.
CiM-25/600 IP Enabled M&C SNMP Interface A.4 Rev. 3 CD/CIM25600.IOM CIM-25 MIB TREE 1 - 1 --- iso 2 - 1.3 --- org 3 - 1.3.6 --- dod 4 - 1.3.6.1 --- internet 5 - 1.3.6.1.4 --- private 6 - 1.3.6.1.4.1 --- enterprises 7 - 1.3.6.1.4.1.6247 --- comtech 8 - 1.3.6.1.4.1.6247.3 --- cim25 9 - 1.3.6.1.4.1.6247.3.1 --- cim25Objects 10 - 1.3.6.1.4.1.6247.3.1.1 --- ipAddress1 (IpAddress) 11 - 1.3.6.1.4.1.6247.3.1.2 --- ipAddress2 (IpAddress) 12 - 1.3.6.1.4.1.6247.3.1.3 --- ipAddress12Range (INTEGER) 13 - 1.3.6.1.4.1.
CiM-25/600 IP Enabled M&C SNMP Interface Rev. 3 CD/CIM25600.IOM 22 - 1.3.6.1.4.1.6247.3.1.13 --- cim25IpGateway (IpAddress) 23 - 1.3.6.1.4.1.6247.3.1.14 --- cim25IpMask (IpAddress) 24 - 1.3.6.1.4.1.6247.3.1.15 --- readonlyPassword (OCTET STRING) 25 - 1.3.6.1.4.1.6247.3.1.16 --- readwritePassword (OCTET STRING) 26 - 1.3.6.1.4.1.6247.3.1.17 --- administratorPassword (OCTET STRING) 27 - 1.3.6.1.4.1.6247.3.1.18 --- trapIpAddress1 (IpAddress) 28 - 1.3.6.1.4.1.6247.3.1.19 --- trapIpAddress2 (IpAddress) 29 - 1.
CiM-25/600 IP Enabled M&C SNMP Interface A.5 A.5.1 CIM-25 MIB ISO Name OID Full path Module Child Type A.5.2 dod 1.3.6 iso(1).org(3).dod(6) SNMPv2-SMI org internet OBJECT-IDENTIFIER INTERNET Name OID Full path Module Parent Child Type A.5.5 org 1.3 iso(1).org(3) SNMPv2-SMI iso dod OBJECT-IDENTIFIER DOD Name OID Full path Module Parent Child Type A.5.4 iso 1 iso(1) SNMPv2-SMI org OBJECT-IDENTIFIER ORG Name OID Full path Module Parent Child Type A.5.3 Rev. 3 CD/CIM25600.IOM internet 1.3.6.
CiM-25/600 IP Enabled M&C SNMP Interface A.5.6 ENTERPRISES Name OID Full path Module Parent Child Type A.5.7 comtech 1.3.6.1.4.1.6247 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) CIM25 enterprises cim25 OBJECT-IDENTIFIER CIM25 Name OID Full path Module Parent Child Type A.5.9 enterprises 1.3.6.1.4.1 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1) CIM25 private comtech OBJECT-IDENTIFIER COMTECH Name OID Full path Module Parent Child Type A.5.8 Rev.
CiM-25/600 IP Enabled M&C SNMP Interface A.5.10 IPADDRESS1 Name OID Full path Module Parent Next sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Description A.5.11 Rev. 3 CD/CIM25600.IOM ipAddress1 1.3.6.1.4.1.6247.3.1.1 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cim25(3).cim25Objects(1).ipAddress1(1) CIM25 cim25Objects ipAddress2 OBJECT-TYPE SNMP_SYNTAX_IPADDR IpAddress IpAddress current read-write IP Address 1 or IP Address 1 Start Range.
CiM-25/600 IP Enabled M&C SNMP Interface A.5.12 IPADDRESS12RANGE Name OID Full path Module Parent Prev sibling Next sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Value list 1 2 Description A.5.13 Rev. 3 CD/CIM25600.IOM ipAddress12Range 1.3.6.1.4.1.6247.3.1.3 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cim25(3).cim25Objects(1).
CiM-25/600 IP Enabled M&C SNMP Interface A.5.14 IPADDRESS4 Name OID Full path Module Parent Prev sibling Next sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Description A.5.15 Rev. 3 CD/CIM25600.IOM ipAddress4 1.3.6.1.4.1.6247.3.1.5 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cim25(3).cim25Objects(1).
CiM-25/600 IP Enabled M&C SNMP Interface A.5.16 IPADDRESS5 Name OID Full path Module Parent Prev sibling Next sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Description A.5.17 Rev. 3 CD/CIM25600.IOM ipAddress5 1.3.6.1.4.1.6247.3.1.7 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cim25(3).cim25Objects(1).
CiM-25/600 IP Enabled M&C SNMP Interface A.5.18 IPADDRESS56RANGE Name OID Full path Module Parent Prev sibling Next sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Value list 1 2 Description A.5.19 Rev. 3 CD/CIM25600.IOM ipAddress56Range 1.3.6.1.4.1.6247.3.1.9 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cim25(3).cim25Objects(1).
CiM-25/600 IP Enabled M&C SNMP Interface A.5.20 DNSIPADDRESSSECONDARY Name OID Full path Module Parent Prev sibling Next sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Description A.5.21 dnsIpAddressSecondary 1.3.6.1.4.1.6247.3.1.11 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cim25(3).cim25Objects(1).
CiM-25/600 IP Enabled M&C SNMP Interface A.5.23 CIM25IPMASK Name OID Full path Module Parent Prev sibling Next sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Description A.5.24 Rev. 3 CD/CIM25600.IOM cim25IpMask 1.3.6.1.4.1.6247.3.1.14 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cim25(3).cim25Objects(1).
CiM-25/600 IP Enabled M&C SNMP Interface A.5.25 READWRITEPASSWORD Name OID Full path Module Parent Prev sibling Next sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Size list 1 Description A.5.26 Rev. 3 CD/CIM25600.IOM readwritePassword 1.3.6.1.4.1.6247.3.1.16 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cim25(3).cim25Objects(1).
CiM-25/600 IP Enabled M&C SNMP Interface A.5.27 TRAPIPADDRESS1 Name OID Full path Module Parent Prev sibling Next sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Description A.5.28 trapIpAddress1 1.3.6.1.4.1.6247.3.1.18 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cim25(3).cim25Objects(1).
CiM-25/600 IP Enabled M&C SNMP Interface A.5.30 ADMINISTRATORNAME Name OID Full path Module Parent Prev sibling Next sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Size list 1 Description A.5.31 Rev. 3 CD/CIM25600.IOM administratorName 1.3.6.1.4.1.6247.3.1.20 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cim25(3).cim25Objects(1).
CiM-25/600 IP Enabled M&C SNMP Interface A.5.32 READWRITENAME Name OID Full path Module Parent Prev sibling Next sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Size list 1 Description A.5.33 Rev. 3 CD/CIM25600.IOM readwriteName 1.3.6.1.4.1.6247.3.1.22 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cim25(3).cim25Objects(1).
CiM-25/600 IP Enabled M&C SNMP Interface A.5.34 Rev. 3 CD/CIM25600.IOM SUBMITCONFIG Name OID Full path Module Parent Prev sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Value list 1 Description submitconfig 1.3.6.1.4.1.6247.3.1.24 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cim25(3).cim25Objects(1).
CiM-25/600 IP Enabled M&C SNMP Interface A.6 Rev. 3 CD/CIM25600.IOM CDM-600 MIB TREE: 1 - 1 --- iso 2 - 1.3 --- org 3 - 1.3.6 --- dod 4 - 1.3.6.1 --- internet 5 - 1.3.6.1.4 --- private 6 - 1.3.6.1.4.1 --- enterprises 7 - 1.3.6.1.4.1.6247 --- comtech 8 - 1.3.6.1.4.1.6247.18 --- cdm600 9 - 1.3.6.1.4.1.6247.18.1 --- cdm600Objects 10 - 1.3.6.1.4.1.6247.18.1.1 --- systemInfo 11 - 1.3.6.1.4.1.6247.18.1.1.1 --- equipmentID (OCTET STRING) 12 - 1.3.6.1.4.1.6247.18.1.1.
CiM-25/600 IP Enabled M&C SNMP Interface Rev. 3 CD/CIM25600.IOM 23 - 1.3.6.1.4.1.6247.18.1.2.4 --- txFECType (INTEGER) 24 - 1.3.6.1.4.1.6247.18.1.2.5 --- txFECCodeRate (INTEGER) 25 - 1.3.6.1.4.1.6247.18.1.2.6 --- txSpecInv (INTEGER) 26 - 1.3.6.1.4.1.6247.18.1.2.7 --- txScrambler (INTEGER) 27 - 1.3.6.1.4.1.6247.18.1.2.8 --- txRSEncoding (INTEGER) 28 - 1.3.6.1.4.1.6247.18.1.2.9 --- txPowerLevel (INTEGER) 29 - 1.3.6.1.4.1.6247.18.1.2.10 --- txCarrierState (INTEGER) 30 - 1.3.6.1.4.1.6247.18.1.2.
CiM-25/600 IP Enabled M&C SNMP Interface Rev. 3 CD/CIM25600.IOM 48 - 1.3.6.1.4.1.6247.18.1.4.5 --- rxFramingMode (INTEGER) 49 - 1.3.6.1.4.1.6247.18.1.4.6 --- txClockSource (INTEGER) 50 - 1.3.6.1.4.1.6247.18.1.4.7 --- rxClockSource (INTEGER) 51 - 1.3.6.1.4.1.6247.18.1.4.8 --- rxBufferSize (INTEGER) 52 - 1.3.6.1.4.1.6247.18.1.4.9 --- externalClock (OCTET STRING) 53 - 1.3.6.1.4.1.6247.18.1.4.10 --- externalReference (INTEGER) 54 - 1.3.6.1.4.1.6247.18.1.4.11 --- txTernaryCode (INTEGER) 55 - 1.3.6.1.4.1.6247.
CiM-25/600 IP Enabled M&C SNMP Interface Rev. 3 CD/CIM25600.IOM 73 - 1.3.6.1.4.1.6247.18.1.5.9 --- oduCommEnable (INTEGER) 74 - 1.3.6.1.4.1.6247.18.1.6 --- aupcParameters 75 - 1.3.6.1.4.1.6247.18.1.6.1 --- aupcEnable (INTEGER) 76 - 1.3.6.1.4.1.6247.18.1.6.2 --- aupcControlParameters (OCTET STRING) 77 - 1.3.6.1.4.1.6247.18.1.6.3 --- remoteEbno (INTEGER) 78 - 1.3.6.1.4.1.6247.18.1.6.4 --- txPowerLevelIncrease (INTEGER) 79 - 1.3.6.1.4.1.6247.18.1.7 --- statusParameters 80 - 1.3.6.1.4.1.6247.18.1.7.
CiM-25/600 IP Enabled M&C SNMP Interface Rev. 3 CD/CIM25600.IOM 98 - 1.3.6.1.4.1.6247.18.1.9.0.2 --- unitConfigChangeTrap 99 - 1.3.6.1.4.1.6247.18.2 --- csat5060Objects 100 - 1.3.6.1.4.1.6247.18.2.1 --- oduSelect (INTEGER) 101 - 1.3.6.1.4.1.6247.18.2.2 --- oduSystemInfo 102 - 1.3.6.1.4.1.6247.18.2.2.1 --- oduModelNumberSoftwareVer (OCTET STRING) 103 - 1.3.6.1.4.1.6247.18.2.2.2 --- oduunitSerialNumber (OCTET STRING) 104 - 1.3.6.1.4.1.6247.18.2.2.3 --- odudeviceTime (OCTET STRING) 105 - 1.3.6.1.4.1.6247.18.
CiM-25/600 IP Enabled M&C SNMP Interface Rev. 3 CD/CIM25600.IOM 122 - 1.3.6.1.4.1.6247.18.2.4.4 --- oduTxMute (INTEGER) 123 - 1.3.6.1.4.1.6247.18.2.4.5 --- oduTxSlopeMode (INTEGER) 124 - 1.3.6.1.4.1.6247.18.2.4.6 --- oduTxSlopeValue (INTEGER) 125 - 1.3.6.1.4.1.6247.18.2.4.7 --- oduTxGainOffset (INTEGER) 126 - 1.3.6.1.4.1.6247.18.2.5 --- oduRxParameters 127 - 1.3.6.1.4.1.6247.18.2.5.1 --- oduRxFrequency (INTEGER) 128 - 1.3.6.1.4.1.6247.18.2.5.2 --- oduRxAttenuation (INTEGER) 129 - 1.3.6.1.4.1.6247.18.2.5.
CiM-25/600 IP Enabled M&C SNMP Interface Rev. 3 CD/CIM25600.IOM 146 - 1.3.6.1.4.1.6247.18.3.1.4 --- kstFirmwareNumbers (OCTET STRING) 147 - 1.3.6.1.4.1.6247.18.3.2 --- kstUnitParameters 148 - 1.3.6.1.4.1.6247.18.3.2.1 --- kstCircuitID (OCTET STRING) 149 - 1.3.6.1.4.1.6247.18.3.2.2 --- kstAgc (INTEGER) 150 - 1.3.6.1.4.1.6247.18.3.2.3 --- kstRefOscillatorAdjust (INTEGER) 151 - 1.3.6.1.4.1.6247.18.3.2.4 --- kstLockMode (INTEGER) 152 - 1.3.6.1.4.1.6247.18.3.3 --- kstTxParameters 153 - 1.3.6.1.4.1.6247.18.3.3.
CiM-25/600 IP Enabled M&C SNMP Interface Rev. 3 CD/CIM25600.IOM 170 - 1.3.6.1.4.1.6247.18.3.5.6 --- kstDownConvStatus (OCTET STRING) 171 - 1.3.6.1.4.1.6247.18.3.5.7 --- kstHpaStatus (OCTET STRING) 172 - 1.3.6.1.4.1.6247.18.3.5.
CiM-25/600 IP Enabled M&C SNMP Interface A.7 A.7.1 CDM-600 MIB ISO Name OID Full path Module Child Type A.7.2 org 1.3 iso(1).org(3) SNMPv2-SMI iso dod OBJECT-IDENTIFIER DOD Name OID Full path Module Parent Child Type A.7.4 iso 1 iso(1) SNMPv2-SMI org OBJECT-IDENTIFIER ORG Name OID Full path Module Parent Child Type A.7.3 Rev. 3 CD/CIM25600.IOM dod 1.3.6 iso(1).org(3).dod(6) SNMPv2-SMI org internet OBJECT-IDENTIFIER INTERNET Name OID Full path Module Parent Child Type internet 1.3.6.1 iso(1).
CiM-25/600 IP Enabled M&C SNMP Interface A.7.5 PRIVATE Name OID Full path Module Parent Child Type A.7.6 enterprises 1.3.6.1.4.1 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1) CDM600 private comtech OBJECT-IDENTIFIER COMTECH Name OID Full path Module Parent Child Type A.7.8 private 1.3.6.1.4 iso(1).org(3).dod(6).internet(1).private(4) CDM600 internet enterprises OBJECT-IDENTIFIER ENTERPRISES Name OID Full path Module Parent Child Type A.7.7 Rev. 3 CD/CIM25600.IOM comtech 1.3.6.1.4.1.
CiM-25/600 IP Enabled M&C SNMP Interface A.7.9 CDM600OBJECTS Name OID Full path Module Parent Next sibling Child Type A.7.10 cdm600Objects 1.3.6.1.4.1.6247.18.1 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cdm600(18).cdm600Objects(1) CDM600 cdm600 oduObjects systemInfo OBJECT-IDENTIFIER SYSTEMINFO Name OID Full path Module Parent Next sibling Child Type A.7.11 Rev. 3 CD/CIM25600.IOM systemInfo 1.3.6.1.4.1.6247.18.1.1 iso(1).org(3).dod(6).internet(1).private(4).
CiM-25/600 IP Enabled M&C SNMP Interface A.7.12 UNITSERIALNUMBER Name OID Full path Module Parent Prev sibling Next sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Size list 1 Description A.7.13 Rev. 3 CD/CIM25600.IOM unitSerialNumber 1.3.6.1.4.1.6247.18.1.1.2 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cdm600(18).cdm600Objects(1).systemInfo(1).
CiM-25/600 IP Enabled M&C SNMP Interface A.7.14 DEVICETIME Name OID Full path Module Parent Prev sibling Next sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Size list 1 Description A.7.15 Rev. 3 CD/CIM25600.IOM deviceTime 1.3.6.1.4.1.6247.18.1.1.4 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cdm600(18).cdm600Objects(1).systemInfo(1).
CiM-25/600 IP Enabled M&C SNMP Interface A.7.16 CIRCUITID Name OID Full path Module Parent Prev sibling Next sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Size list 1 Description A.7.17 Rev. 3 CD/CIM25600.IOM circuitID 1.3.6.1.4.1.6247.18.1.1.6 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cdm600(18).cdm600Objects(1).systemInfo(1).
CiM-25/600 IP Enabled M&C SNMP Interface A.7.18 DEVICETEMPERATURE Name OID Full path Module Parent Prev sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Units Description A.7.19 Rev. 3 CD/CIM25600.IOM deviceTemperature 1.3.6.1.4.1.6247.18.1.1.8 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cdm600(18).cdm600Objects(1).systemInfo(1).
CiM-25/600 IP Enabled M&C SNMP Interface A.7.20 TXFREQUENCY Name OID Full path Module Parent Next sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Size list 1 2 Description A.7.21 Rev. 3 CD/CIM25600.IOM txFrequency 1.3.6.1.4.1.6247.18.1.2.1 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cdm600(18).cdm600Objects(1).txParameters(2).txFrequency(1) CDM600 txParameters txDataRate OBJECT-TYPE SNMP_SYNTAX_INT INTEGER INTEGER current read-write 520000..
CiM-25/600 IP Enabled M&C SNMP Interface A.7.22 Rev. 3 CD/CIM25600.IOM TXMODTYPE Name OID Full path Module Parent Prev sibling Next sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Value list 1 2 3 4 5 Description txModType 1.3.6.1.4.1.6247.18.1.2.3 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cdm600(18).cdm600Objects(1).txParameters(2).
CiM-25/600 IP Enabled M&C SNMP Interface A.7.23 Rev. 3 CD/CIM25600.IOM TXFECTYPE Name OID Full path Module Parent Prev sibling Next sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Value list 1 2 3 4 5 6 7 8 9 Description txFECType 1.3.6.1.4.1.6247.18.1.2.4 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cdm600(18).cdm600Objects(1).txParameters(2).
CiM-25/600 IP Enabled M&C SNMP Interface A.7.24 TXFECCODERATE Name OID Full path Module Parent Prev sibling Next sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Value list 1 2 3 4 5 6 7 8 Description A.7.25 Rev. 3 CD/CIM25600.IOM txFECCodeRate 1.3.6.1.4.1.6247.18.1.2.5 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cdm600(18).cdm600Objects(1).txParameters(2).
CiM-25/600 IP Enabled M&C SNMP Interface A.7.26 TXSCRAMBLER Name OID Full path Module Parent Prev sibling Next sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Value list 1 2 Description A.7.27 Rev. 3 CD/CIM25600.IOM txScrambler 1.3.6.1.4.1.6247.18.1.2.7 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cdm600(18).cdm600Objects(1).txParameters(2).
CiM-25/600 IP Enabled M&C SNMP Interface A.7.28 TXPOWERLEVEL Name OID Full path Module Parent Prev sibling Next sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Size list 1 Description A.7.29 Rev. 3 CD/CIM25600.IOM txPowerLevel 1.3.6.1.4.1.6247.18.1.2.9 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cdm600(18).cdm600Objects(1).txParameters(2).
CiM-25/600 IP Enabled M&C SNMP Interface A.7.30 TXDATAINV Name OID Full path Module Parent Prev sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Value list 1 2 Description A.7.31 Rev. 3 CD/CIM25600.IOM txDataInv 1.3.6.1.4.1.6247.18.1.2.11 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cdm600(18).cdm600Objects(1).txParameters(2).
CiM-25/600 IP Enabled M&C SNMP Interface A.7.32 RXFREQUENCY Name OID Full path Module Parent Next sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Size list 1 2 Description A.7.33 Rev. 3 CD/CIM25600.IOM rxFrequency 1.3.6.1.4.1.6247.18.1.3.1 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cdm600(18).cdm600Objects(1).rxParameters(3).rxFrequency(1) CDM600 rxParameters rxDataRate OBJECT-TYPE SNMP_SYNTAX_INT INTEGER INTEGER current read-write 520000..
CiM-25/600 IP Enabled M&C SNMP Interface A.7.34 Rev. 3 CD/CIM25600.IOM RXDEMODTYPE Name OID Full path Module Parent Prev sibling Next sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Value list 1 2 3 4 5 Description rxDemodType 1.3.6.1.4.1.6247.18.1.3.3 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cdm600(18).cdm600Objects(1).rxParameters(3).
CiM-25/600 IP Enabled M&C SNMP Interface A.7.35 Rev. 3 CD/CIM25600.IOM RXFECTYPE Name OID Full path Module Parent Prev sibling Next sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Value list 1 2 3 4 5 6 7 8 9 Description rxFECType 1.3.6.1.4.1.6247.18.1.3.4 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cdm600(18).cdm600Objects(1).rxParameters(3).
CiM-25/600 IP Enabled M&C SNMP Interface A.7.36 RXFECCODERATE Name OID Full path Module Parent Prev sibling Next sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Value list 1 2 3 4 5 6 7 8 Description A.7.37 Rev. 3 CD/CIM25600.IOM rxFECCodeRate 1.3.6.1.4.1.6247.18.1.3.5 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cdm600(18).cdm600Objects(1).rxParameters(3).
CiM-25/600 IP Enabled M&C SNMP Interface A.7.38 RXDESCRAMBLER Name OID Full path Module Parent Prev sibling Next sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Value list 1 2 Description A.7.39 Rev. 3 CD/CIM25600.IOM rxDescrambler 1.3.6.1.4.1.6247.18.1.3.7 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cdm600(18).cdm600Objects(1).rxParameters(3).
CiM-25/600 IP Enabled M&C SNMP Interface A.7.40 Rev. 3 CD/CIM25600.IOM RXDATAINV Name OID Full path rxDataInv 1.3.6.1.4.1.6247.18.1.3.9 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cdm600(18).cdm600Objects(1).rxParameters(3).
CiM-25/600 IP Enabled M&C SNMP Interface A.7.42 RXEBNOALARMPOINT Name OID Full path Module Parent Prev sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Size list 1 Description A.7.43 Rev. 3 CD/CIM25600.IOM rxEbnoAlarmPoint 1.3.6.1.4.1.6247.18.1.3.11 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247). cdm600(18).cdm600Objects(1).rxParameters(3).
CiM-25/600 IP Enabled M&C SNMP Interface A.7.44 IFIMPEDANCE Name OID Full path Module Parent Next sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Value list 1 2 Description A.7.45 Rev. 3 CD/CIM25600.IOM ifImpedance 1.3.6.1.4.1.6247.18.1.4.1 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247).c dm600(18).cdm600Objects(1).interfaceParameters(4).
CiM-25/600 IP Enabled M&C SNMP Interface A.7.46 Rev. 3 CD/CIM25600.IOM RXINTERFACETYPE Name OID Full path Module Parent Prev sibling Next sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Value list 1 2 3 4 5 6 7 Description rxInterfaceType 1.3.6.1.4.1.6247.18.1.4.3 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247).cd m600(18).cdm600Objects(1).interfaceParameters(4).
CiM-25/600 IP Enabled M&C SNMP Interface A.7.47 Rev. 3 CD/CIM25600.IOM TXFRAMINGMODE Name OID Full path Module Parent Prev sibling Next sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Value list 1 2 3 4 5 Description txFramingMode 1.3.6.1.4.1.6247.18.1.4.4 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247).cd m600(18).cdm600Objects(1).interfaceParameters(4).
CiM-25/600 IP Enabled M&C SNMP Interface A.7.48 Rev. 3 CD/CIM25600.IOM RXFRAMINGMODE Name OID Full path Module Parent Prev sibling Next sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Value list 1 2 3 4 5 Description rxFramingMode 1.3.6.1.4.1.6247.18.1.4.5 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247).cd m600(18).cdm600Objects(1).interfaceParameters(4).
CiM-25/600 IP Enabled M&C SNMP Interface A.7.49 TXCLOCKSOURCE Name OID Full path Module Parent Prev sibling Next sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Value list 1 2 3 4 Description A.7.50 Rev. 3 CD/CIM25600.IOM txClockSource 1.3.6.1.4.1.6247.18.1.4.6 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cdm600(18).cdm600Objects(1).interfaceParameters(4).
CiM-25/600 IP Enabled M&C SNMP Interface A.7.51 RXBUFFERSIZE Name OID Full path Module Parent Prev sibling Next sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Size list 1 Description A.7.52 Rev. 3 CD/CIM25600.IOM rxBufferSize 1.3.6.1.4.1.6247.18.1.4.8 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247).c dm600(18).cdm600Objects(1).interfaceParameters(4).
CiM-25/600 IP Enabled M&C SNMP Interface A.7.53 Rev. 3 CD/CIM25600.IOM EXTERNALREFERENCE Name OID Full path Module Parent Prev sibling Next sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Value List 1 2 3 4 5 6 Description externalReference 1.3.6.1.4.1.6247.18.1.4.10 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247).cdm 600(18).cdm600Objects(1).interfaceParameters(4).
CiM-25/600 IP Enabled M&C SNMP Interface A.7.54 TXTERNARYCODE Name OID Full path Module Parent Prev sibling Next sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Value list 1 2 3 4 Description A.7.55 Rev. 3 CD/CIM25600.IOM txTernaryCode 1.3.6.1.4.1.6247.18.1.4.11 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247).cd m600(18).cdm600Objects(1).interfaceParameters(4).
CiM-25/600 IP Enabled M&C SNMP Interface A.7.56 IDRTXESCTYPE Name OID Full path Module Parent Prev sibling Next sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Value list 1 2 Description A.7.57 Rev. 3 CD/CIM25600.IOM idrTxESCType 1.3.6.1.4.1.6247.18.1.4.13 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cdm600(18).cdm600Objects(1).interfaceParameters(4).
CiM-25/600 IP Enabled M&C SNMP Interface A.7.58 TXAUDIOVOLUME Name OID Full path Module Parent Prev sibling Next sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Size list 1 Description A.7.59 Rev. 3 CD/CIM25600.IOM txAudioVolume 1.3.6.1.4.1.6247.18.1.4.15 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247).cdm6 00(18).cdm600Objects(1).interfaceParameters(4).
CiM-25/600 IP Enabled M&C SNMP Interface A.7.60 Rev. 3 CD/CIM25600.IOM DROPANDINSERT Name OID Full path Module Parent Prev sibling Next sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Size list 1 Description dropAndInsert 1.3.6.1.4.1.6247.18.1.4.17 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cdm600(18).cdm600Objects(1).interfaceParameters(4).
CiM-25/600 IP Enabled M&C SNMP Interface A.7.61 TXTERRESTRIALALARMMASK Name OID Full path Module Parent Prev sibling Next sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Value list 1 2 Description A.7.62 Rev. 3 CD/CIM25600.IOM txTerrestrialAlarmMask 1.3.6.1.4.1.6247.18.1.4.18 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247).cdm60 0(18).cdm600Objects(1).interfaceParameters(4).
CiM-25/600 IP Enabled M&C SNMP Interface A.7.63 RECENTERBUFFER Name OID Full path Module Parent Prev sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Value list 1 Description A.7.64 Rev. 3 CD/CIM25600.IOM recenterBuffer 1.3.6.1.4.1.6247.18.1.4.20 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cdm600(18).cdm600Objects(1).interfaceParameters(4).
CiM-25/600 IP Enabled M&C SNMP Interface A.7.65 EDMACFRAMINGMODE Name OID Full path Module Parent Next sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Value list 1 2 3 Description A.7.66 Rev. 3 CD/CIM25600.IOM edmacFramingMode 1.3.6.1.4.1.6247.18.1.5.1 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247).cd m600(18).cdm600Objects(1).utilityParameters(5).
CiM-25/600 IP Enabled M&C SNMP Interface A.7.67 Rev. 3 CD/CIM25600.IOM UNITTESTMODE Name OID Full path Module Parent Prev sibling Next sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Value list 1 2 3 4 5 6 7 Description unitTestMode 1.3.6.1.4.1.6247.18.1.5.3 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cdm600(18).cdm600Objects(1).utilityParameters(5).
CiM-25/600 IP Enabled M&C SNMP Interface A.7.68 UNITALARMMASK Name OID Full path Module Parent Prev sibling Next sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Size list 1 Description A.7.69 Rev. 3 CD/CIM25600.IOM unitAlarmMask 1.3.6.1.4.1.6247.18.1.5.4 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cdm600(18).cdm600Objects(1).utilityParameters(5).
CiM-25/600 IP Enabled M&C SNMP Interface A.7.70 RXBACKWARDALARMENABLE Name OID Full path Module Parent Prev sibling Next sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Size list 1 Description A.7.71 Rev. 3 CD/CIM25600.IOM rxBackwardAlarmEnable 1.3.6.1.4.1.6247.18.1.5.6 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cdm600(18).cdm600Objects(1).utilityParameters(5).
CiM-25/600 IP Enabled M&C SNMP Interface A.7.72 UNITCONFIGLOAD Name OID Full path Module Parent Prev sibling Next sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Size list 1 Description A.7.73 Rev. 3 CD/CIM25600.IOM unitConfigLoad 1.3.6.1.4.1.6247.18.1.5.8 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cdm600(18).cdm600Objects(1).utilityParameters(5).
CiM-25/600 IP Enabled M&C SNMP Interface A.7.74 AUPCPARAMETERS Name OID Full path Module Parent Prev sibling Next sibling Child Type A.7.75 Rev. 3 CD/CIM25600.IOM aupcParameters 1.3.6.1.4.1.6247.18.1.6 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cdm600(18).cdm600Objects(1).
CiM-25/600 IP Enabled M&C SNMP Interface A.7.76 AUPCCONTROLPARAMETERS Name OID Full path Module Parent Prev sibling Next sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Size list 1 Description A.7.77 Rev. 3 CD/CIM25600.IOM aupcControlParameters 1.3.6.1.4.1.6247.18.1.6.2 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cdm600(18).cdm600Objects(1).aupcParameters(6).
CiM-25/600 IP Enabled M&C SNMP Interface A.7.78 TXPOWERLEVELINCREASE Name OID Full path Module Parent Prev sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Size list 1 2 Description A.7.79 Rev. 3 CD/CIM25600.IOM txPowerLevelIncrease 1.3.6.1.4.1.6247.18.1.6.4 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247).cd m600(18).cdm600Objects(1).aupcParameters(6).
CiM-25/600 IP Enabled M&C SNMP Interface A.7.80 RXEBNO Name OID Full path Module Parent Next sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Size list 1 2 Units Description A.7.81 Rev. 3 CD/CIM25600.IOM rxEbno 1.3.6.1.4.1.6247.18.1.7.1 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cdm600(18).cdm600Objects(1).statusParameters(7).rxEbno(1) CDM600 statusParameters rxSignalLevel OBJECT-TYPE SNMP_SYNTAX_INT INTEGER INTEGER current read-only 0..
CiM-25/600 IP Enabled M&C SNMP Interface A.7.82 RXFREQUENCYOFFSET Name OID Full path Module Parent Prev sibling Next sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Size list 1 2 Units Description A.7.83 Rev. 3 CD/CIM25600.IOM rxFrequencyOffset 1.3.6.1.4.1.6247.18.1.7.3 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247).cd m600(18).cdm600Objects(1).statusParameters(7).
CiM-25/600 IP Enabled M&C SNMP Interface A.7.84 RXBER Name OID Full path Module Parent Prev sibling Next sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Description A.7.85 Rev. 3 CD/CIM25600.IOM rxBER 1.3.6.1.4.1.6247.18.1.7.5 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cdm600(18).cdm600Objects(1).statusParameters(7).
CiM-25/600 IP Enabled M&C SNMP Interface A.7.86 Rev. 3 CD/CIM25600.IOM UNITFAULTS Name OID Full path Module Parent Prev sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Size list 1 Description unitFaults 1.3.6.1.4.1.6247.18.1.7.7 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cdm600(18).cdm600Objects(1).statusParameters(7).unitFaults(7) CDM600 statusParameters redundancyState OBJECT-TYPE SNMP_SYNTAX_INT INTEGER INTEGER current read-only 0..
CiM-25/600 IP Enabled M&C SNMP Interface Rev. 3 CD/CIM25600.
CiM-25/600 IP Enabled M&C SNMP Interface A.7.88 CLEAREVENTSLOG Name OID Full path Module Parent Next sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Value list 1 Description A.7.89 Rev. 3 CD/CIM25600.IOM clearEventsLog 1.3.6.1.4.1.6247.18.1.8.1 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cdm600(18).cdm600Objects(1).logs(8).
CiM-25/600 IP Enabled M&C SNMP Interface A.7.90 RETRIEVENEXT5EVENTS Name OID Full path Module Parent Prev sibling Next sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Description A.7.91 Rev. 3 CD/CIM25600.IOM retrieveNext5Events 1.3.6.1.4.1.6247.18.1.8.3 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cdm600(18).cdm600Objects(1).logs(8).
CiM-25/600 IP Enabled M&C SNMP Interface A.7.92 CLEARSTATISTICSLOG Name OID Full path Module Parent Prev sibling Next sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Value list 1 Description A.7.93 Rev. 3 CD/CIM25600.IOM clearStatisticsLog 1.3.6.1.4.1.6247.18.1.8.5 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cdm600(18).cdm600Objects(1).logs(8).
CiM-25/600 IP Enabled M&C SNMP Interface A.7.94 RETRIEVENEXT5STATISTICS Name OID Full path Module Parent Prev sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Description A.7.95 retrieveNext5Statistics 1.3.6.1.4.1.6247.18.1.8.7 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cdm600(18).cdm600Objects(1).logs(8).
CiM-25/600 IP Enabled M&C SNMP Interface A.7.97 Rev. 3 CD/CIM25600.IOM UNITFAULTTRAPS Name OID Full path Module Parent Next sibling Type Status Objects 1 Description unitFaultTraps 1.3.6.1.4.1.6247.18.1.9.0.1 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cdm600(18).cdm600Objects(1).trapNotifications(9).trapNotificationsPr efix(0).unitFaultTraps(1) CDM600 trapNotificationsPrefix unitConfigChangeTrap NOTIFICATION-TYPE current unitFaults Unit Fault Trap Using unitFaults.
CiM-25/600 IP Enabled M&C SNMP Interface Rev. 3 CD/CIM25600.
CiM-25/600 IP Enabled M&C SNMP Interface A.7.99 CSAT5060OBJECTS Name OID Full path Module Parent Prev sibling Next sibling Child Type A.7.100 csat5060Objects 1.3.6.1.4.1.6247.18.2 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cdm600(18).
CiM-25/600 IP Enabled M&C SNMP Interface A.7.102 ODUMODELNUMBERSOFTWAREVER Name OID Full path Module Parent Next sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Size list 1 Description A.7.103 Rev. 3 CD/CIM25600.IOM oduModelNumberSoftwareVer 1.3.6.1.4.1.6247.18.2.2.1 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cdm600(18).csat5060Objects(2).oduSystemInfo(2).
CiM-25/600 IP Enabled M&C SNMP Interface A.7.104 ODUDEVICETIME Name OID Full path Module Parent Prev sibling Next sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Size list 1 Description A.7.105 Rev. 3 CD/CIM25600.IOM odudeviceTime 1.3.6.1.4.1.6247.18.2.2.3 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cdm600(18).csat5060Objects(2).oduSystemInfo(2).
CiM-25/600 IP Enabled M&C SNMP Interface A.7.106 ODUCIRCUITID Name OID Full path Module Parent Prev sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Size list 1 Description A.7.107 Rev. 3 CD/CIM25600.IOM oducircuitID 1.3.6.1.4.1.6247.18.2.2.5 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cdm600(18).csat5060Objects(2).oduSystemInfo(2).
CiM-25/600 IP Enabled M&C SNMP Interface A.7.108 ODUUNITMUTEMODE Name OID Full path Module Parent Next sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Value list 1 2 Description A.7.109 Rev. 3 CD/CIM25600.IOM oduUnitMuteMode 1.3.6.1.4.1.6247.18.2.3.1 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cdm600(18).csat5060Objects(2).oduUnitParameters(3).
CiM-25/600 IP Enabled M&C SNMP Interface A.7.110 ODUUNITAUTOFAULTRECOVERY Name OID Full path Module Parent Prev sibling Next sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Value list 1 2 Description A.7.111 Rev. 3 CD/CIM25600.IOM oduUnitAutoFaultRecovery 1.3.6.1.4.1.6247.18.2.3.3 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cdm600(18).csat5060Objects(2).oduUnitParameters(3).
CiM-25/600 IP Enabled M&C SNMP Interface A.7.112 ODUUNITREFOSCADJUST Name OID Full path Module Parent Prev sibling Next sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Size list 1 Description A.7.113 Rev. 3 CD/CIM25600.IOM oduUnitRefOscAdjust 1.3.6.1.4.1.6247.18.2.3.5 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cdm600(18).csat5060Objects(2).oduUnitParameters(3).
CiM-25/600 IP Enabled M&C SNMP Interface A.7.114 Rev. 3 CD/CIM25600.IOM ODUUNITLNACURRENTWINDOW Name OID Full path Module Parent Prev sibling Next sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Value list 1 2 3 4 5 6 7 8 Description oduUnitLNACurrentWindow 1.3.6.1.4.1.6247.18.2.3.7 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cdm600(18).csat5060Objects(2).oduUnitParameters(3).
CiM-25/600 IP Enabled M&C SNMP Interface A.7.115 ODUUNITLNAFAULTLOGIC Name OID Full path Module Parent Prev sibling Next sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Value list 1 2 Description A.7.116 Rev. 3 CD/CIM25600.IOM oduUnitLNAFaultLogic 1.3.6.1.4.1.6247.18.2.3.8 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cdm600(18).csat5060Objects(2).oduUnitParameters(3).
CiM-25/600 IP Enabled M&C SNMP Interface A.7.117 ODUUNITREDFORCESWITCH Name OID Full path Module Parent Prev sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Value list 1 Description A.7.118 Rev. 3 CD/CIM25600.IOM oduUnitRedForceSwitch 1.3.6.1.4.1.6247.18.2.3.10 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cdm600(18).csat5060Objects(2).oduUnitParameters(3).
CiM-25/600 IP Enabled M&C SNMP Interface A.7.119 ODUTXFREQUENCY Name OID Full path Module Parent Next sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Size list 1 Description A.7.120 Rev. 3 CD/CIM25600.IOM odutxFrequency 1.3.6.1.4.1.6247.18.2.4.1 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cdm600(18).csat5060Objects(2).oduTxParameters(4).
CiM-25/600 IP Enabled M&C SNMP Interface A.7.121 ODUTXAMPLIFIER Name OID Full path Module Parent Prev sibling Next sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Value list 1 2 Description A.7.122 Rev. 3 CD/CIM25600.IOM oduTxAmplifier 1.3.6.1.4.1.6247.18.2.4.3 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cdm600(18).csat5060Objects(2).oduTxParameters(4).
CiM-25/600 IP Enabled M&C SNMP Interface A.7.123 ODUTXSLOPEMODE Name OID Full path Module Parent Prev sibling Next sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Value list 1 2 Description A.7.124 Rev. 3 CD/CIM25600.IOM oduTxSlopeMode 1.3.6.1.4.1.6247.18.2.4.5 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cdm600(18).csat5060Objects(2).oduTxParameters(4).
CiM-25/600 IP Enabled M&C SNMP Interface A.7.125 ODUTXGAINOFFSET Name OID Full path Module Parent Prev sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Size list 1 Description A.7.126 Rev. 3 CD/CIM25600.IOM oduTxGainOffset 1.3.6.1.4.1.6247.18.2.4.7 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cdm600(18).csat5060Objects(2).oduTxParameters(4).
CiM-25/600 IP Enabled M&C SNMP Interface A.7.127 ODURXFREQUENCY Name OID Full path Module Parent Next sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Size list 1 Description A.7.128 Rev. 3 CD/CIM25600.IOM oduRxFrequency 1.3.6.1.4.1.6247.18.2.5.1 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cdm600(18).csat5060Objects(2).oduRxParameters(5).
CiM-25/600 IP Enabled M&C SNMP Interface A.7.129 ODURXMUTE Name OID Full path Module Parent Prev sibling Next sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Value list 1 2 Description A.7.130 Rev. 3 CD/CIM25600.IOM oduRxMute 1.3.6.1.4.1.6247.18.2.5.3 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cdm600(18).csat5060Objects(2).oduRxParameters(5).
CiM-25/600 IP Enabled M&C SNMP Interface A.7.131 ODURXSLOPEVALUE Name OID Full path Module Parent Prev sibling Next sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Size list 1 Description A.7.132 Rev. 3 CD/CIM25600.IOM oduRxSlopeValue 1.3.6.1.4.1.6247.18.2.5.5 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cdm600(18).csat5060Objects(2).oduRxParameters(5).
CiM-25/600 IP Enabled M&C SNMP Interface A.7.133 ODUUNITSTATUS Name OID Full path Module Parent Prev sibling Next sibling Child Type A.7.134 Rev. 3 CD/CIM25600.IOM oduUnitStatus 1.3.6.1.4.1.6247.18.2.6 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cdm600(18).csat5060Objects(2).
CiM-25/600 IP Enabled M&C SNMP Interface A.7.135 ODUMAINTENANCEPARAMETERS Name OID Full path Module Parent Prev sibling Next sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Size list 1 Description A.7.136 Rev. 3 CD/CIM25600.IOM oduMaintenanceParameters 1.3.6.1.4.1.6247.18.2.6.2 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cdm600(18).csat5060Objects(2).oduUnitStatus(6).
CiM-25/600 IP Enabled M&C SNMP Interface A.7.137 ODULOGS Name OID Full path Module Parent Prev sibling Child Type A.7.138 Rev. 3 CD/CIM25600.IOM oduLogs 1.3.6.1.4.1.6247.18.2.7 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cdm600(18).csat5060Objects(2).
CiM-25/600 IP Enabled M&C SNMP Interface A.7.139 ODUNUMBERUNREADEVENTS Name OID Full path Module Parent Prev sibling Next sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Size list 1 Description A.7.140 Rev. 3 CD/CIM25600.IOM oduNumberUnreadEvents 1.3.6.1.4.1.6247.18.2.7.2 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cdm600(18).csat5060Objects(2).oduLogs(7).
CiM-25/600 IP Enabled M&C SNMP Interface A.7.141 KST2000OBJECTS Name OID Full path Module Parent Prev sibling Child Type A.7.142 kst2000Objects 1.3.6.1.4.1.6247.18.3 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cdm600(18).kst2000Objects(3) CDM600 cdm600 csat5060Objects kstSystemInfo OBJECT-IDENTIFIER KSTSYSTEMINFO Name OID Full path Module Parent Next sibling Child Type A.7.143 Rev. 3 CD/CIM25600.IOM kstSystemInfo 1.3.6.1.4.1.6247.18.3.1 iso(1).org(3).dod(6).internet(1).
CiM-25/600 IP Enabled M&C SNMP Interface A.7.144 KSTSERIALNUMBERS Name OID Full path Module Parent Prev sibling Next sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Description A.7.145 Rev. 3 CD/CIM25600.IOM kstSerialNumbers 1.3.6.1.4.1.6247.18.3.1.2 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cdm600(18).kst2000Objects(3).kstSystemInfo(1).
CiM-25/600 IP Enabled M&C SNMP Interface A.7.146 KSTFIRMWARENUMBERS Name OID Full path Module Parent Prev sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Description A.7.147 Rev. 3 CD/CIM25600.IOM kstFirmwareNumbers 1.3.6.1.4.1.6247.18.3.1.4 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247).c dm600(18).kst2000Objects(3).kstSystemInfo(1).
CiM-25/600 IP Enabled M&C SNMP Interface A.7.148 Rev. 3 CD/CIM25600.IOM KSTCIRCUITID Name OID Full path Module Parent Next sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Size list 1 Description kstCircuitID 1.3.6.1.4.1.6247.18.3.2.1 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cdm600(18).kst2000Objects(3).kstUnitParameters(2).
CiM-25/600 IP Enabled M&C SNMP Interface A.7.149 KSTAGC Name OID Full path Module Parent Prev sibling Next sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Value list 1 2 Description A.7.150 Rev. 3 CD/CIM25600.IOM kstAgc 1.3.6.1.4.1.6247.18.3.2.2 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cdm600(18).kst2000Objects(3).kstUnitParameters(2).
CiM-25/600 IP Enabled M&C SNMP Interface A.7.151 KSTLOCKMODE Name OID Full path Module Parent Prev sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Value list 1 2 Description A.7.152 Rev. 3 CD/CIM25600.IOM kstLockMode 1.3.6.1.4.1.6247.18.3.2.4 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cdm600(18).kst2000Objects(3).kstUnitParameters(2).
CiM-25/600 IP Enabled M&C SNMP Interface A.7.153 KSTUPCONVFREQUENCY Name OID Full path Module Parent Next sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Size list 1 Units Description A.7.154 Rev. 3 CD/CIM25600.IOM kstUpConvFrequency 1.3.6.1.4.1.6247.18.3.3.1 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cdm600(18).kst2000Objects(3).kstTxParameters(3).
CiM-25/600 IP Enabled M&C SNMP Interface A.7.155 Rev. 3 CD/CIM25600.IOM KSTUPCONVOUTPUT Name OID Full path Module Parent Prev sibling Next sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Value list 1 2 3 Description kstUpConvOutput 1.3.6.1.4.1.6247.18.3.3.3 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cdm600(18).kst2000Objects(3).kstTxParameters(3).
CiM-25/600 IP Enabled M&C SNMP Interface A.7.156 KSTHPAPOWERENABLE Name OID Full path Module Parent Prev sibling Next sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Value list 1 2 Description A.7.157 Rev. 3 CD/CIM25600.IOM kstHpaPowerEnable 1.3.6.1.4.1.6247.18.3.3.4 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cdm600(18).kst2000Objects(3).kstTxParameters(3).
CiM-25/600 IP Enabled M&C SNMP Interface A.7.158 KSTRXPARAMETERS Name OID Full path Module Parent Prev sibling Next sibling Child Type A.7.159 Rev. 3 CD/CIM25600.IOM kstRxParameters 1.3.6.1.4.1.6247.18.3.4 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cdm600(18).kst2000Objects(3).
CiM-25/600 IP Enabled M&C SNMP Interface A.7.160 Rev. 3 CD/CIM25600.IOM KSTDOWNCONVATTENUATION Name OID Full path Module Parent Prev sibling Next sibling Type Numerical syntax Base syntax Composed syntax Status Max-access kstDownConvAttenuation 1.3.6.1.4.1.6247.18.3.4.2 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cdm600(18).kst2000Objects(3).kstRxParameters(4).
CiM-25/600 IP Enabled M&C SNMP Interface A.7.162 KSTLNAPOWERENABLE Name OID Full path Module Parent Prev sibling Next sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Value list 1 2 Description A.7.163 Rev. 3 CD/CIM25600.IOM kstLnaPowerEnable 1.3.6.1.4.1.6247.18.3.4.4 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cdm600(18).kst2000Objects(3).kstRxParameters(4).
CiM-25/600 IP Enabled M&C SNMP Interface A.7.164 KSTUNITSTATUS Name OID Full path Module Parent Prev sibling Child Type Numerical syntax A.7.165 Rev. 3 CD/CIM25600.IOM kstUnitStatus 1.3.6.1.4.1.6247.18.3.5 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cdm600(18).kst2000Objects(3).kstUnitStatus(5) CDM600 kst2000Objects kstRxParameters kstUnitFaultStatus OBJECT-IDENTIFIER SNMP_SYNTAX_INT KSTUNITFAULTSTATUS Name OID Full path kstUnitFaultStatus 1.3.6.1.4.1.6247.18.3.5.
CiM-25/600 IP Enabled M&C SNMP Interface A.7.166 Rev. 3 CD/CIM25600.IOM KSTCOMMONEQUIPMENTSTATUS Name OID Full path Module Parent Prev sibling Next sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Size list 1 Description kstCommonEquipmentStatus 1.3.6.1.4.1.6247.18.3.5.2 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247) .cdm600(18).kst2000Objects(3).kstUnitStatus(5).
CiM-25/600 IP Enabled M&C SNMP Interface A.7.167 KSTREFERENCESTATUS Name OID Full path Module Parent Prev sibling Next sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Size list 1 Description A.7.168 Rev. 3 CD/CIM25600.IOM kstReferenceStatus 1.3.6.1.4.1.6247.18.3.5.3 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247). cdm600(18).kst2000Objects(3).kstUnitStatus(5).
CiM-25/600 IP Enabled M&C SNMP Interface Description A.7.169 KST-2000A/B AGC Status. (CAS?, CAS=) CAS=ABC, where: A = Loop Convergence, 0=OK, 1=FLT B = Excessive Input Power (EIP), 0=OK, 1=FLT C = Insufficient Input Power (IIP), 0=OK, 1=FLT KSTUPCONVSTATUS Name OID Full path Module Parent Prev sibling Next sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Size list 1 Description A.7.170 Rev. 3 CD/CIM25600.IOM kstUpConvStatus 1.3.6.1.4.1.6247.18.3.5.5 iso(1).org(3).dod(6).
CiM-25/600 IP Enabled M&C SNMP Interface Max-access Size list read-only 1 Description A.7.171 Rev. 3 CD/CIM25600.IOM 4 KST-2000A/B Down Converter Status. (CDS?, CDS=) CDS=ABCD, where: A = Over temperature status, 0=OK, 1=FLT B = L-Band Synthesizer Lock Status, 0=OK, 1=FLT C = Ku-Band Synthesizer Lock Status, 0=OK, 1=FLT D = Interprocessor Comm.
CiM-25/600 IP Enabled M&C SNMP Interface A.7.172 Rev. 3 CD/CIM25600.IOM KSTLNASTATUS Name OID Full path Module Parent Prev sibling Type Numerical syntax Base syntax Composed syntax Status Max-access Size list 1 Description kstLnaStatus 1.3.6.1.4.1.6247.18.3.5.8 iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247). cdm600(18).kst2000Objects(3).kstUnitStatus(5).
Index A K About this Manual........................................x Administration and Security ........................7 Administration Page (Common) ................16 KST-2000A/B ODU Configuration Page……27 KST-2000A/B Status Page…………………..28 KST-2000A/B Utilities………………………29 C L CDM-600 MIB Tree ..................................63 CDM-600 MIB...........................................71 Local LAN Configuration..........................10 Logoff Page................................................
CiM-25/600 IP Enabled M&C Index Rev. 3 CD/CIM25600.IOM T Telnet Administrative Functions................35 Telnet Interface ..........................................34 Trademarks ..................................................x U Unpacking and Inspection............................3 Using Telnet with Equipment Remote Control Protocol...................................41 Utilities Page..............................................22 V Verifying Software Version.......................
METRIC CONVERSIONS Units of Length Unit Centimeter Inch Foot Yard Mile Meter Kilometer Millimeter 1 centimeter — 0.3937 0.03281 0.01094 6.214 x 10-6 0.01 — — 1 inch 2.540 — 0.08333 0.2778 1.578 x 10-5 0.254 — 25.4 1 foot 30.480 12.0 — 0.3333 1.893 x 10-4 0.3048 — — 1 yard 91.44 36.0 3.0 — 5.679 x 10-4 0.9144 — — 1 meter 100.0 39.37 3.281 1.094 6.214 x 10-4 — — — 1 mile 1.609 x 105 6.336 x 104 5.280 x 103 1.760 x 103 — 1.609 x 103 1.
2114 WEST 7TH STREET TEMPE ARIZONA 85281 USA 480 • 333 • 2200 PHONE 480 • 333 • 2161 FAX A–2