Product specifications

MBT-4000 Multi-Band Transceiver System Revision 4
Remote Control MN/MBT4000.IOM
A–16
Parameter
Type
Command
(Instruction
Code and
qualifier)
V
alid on
MBT,
BDC, or
BUC
Arguments
for Command
or Response
to Query
Description of Arguments
(Note that all arguments are ASCII numeric codes – i.e.,
ASCII codes between 48 and 57)
Response to
Command
(Target to
Controller)
Query
(Instruction
Code and
qualifier)
Response to
Query
(Target to
Controller)
Retrieve
AUX
COMM I/O
N/A MBT 1 byte,
value of
n=1 or 2
1=Aux
Comm1
2=Aux
Comm2
Query only.
Used to Retrieve AUX COMM I/O of the MBT-4000 base unit,
where: n=1 (Aux Comm 1) or 2 (Aux Comm 2).
Example: <0001/RAI?1
Returns:
>0001/RAI=
12V1=On
IO1A=0
IO1B=1
RSVD=0
Note: 0 = Logic low or input voltage < 0.5 vdc.
1 = Logic level 1 or input voltage > 2.7 vdc.
RAI = (message OK)
RAI? (received OK,
but invalid arguments
found)
RAI* (message OK,
but not permitted in
current mode)
RAI?n RAI=x….x
(see description
for details of
arguments)
Redundancy
Mode
RAM=um MBT u=1 byte,
value of 1, 2
1=Unit 1
2=Unit 2
m=1 byte,
Value of 0, 1
0 = Manual
1 = Automatic
Command or Query.
Sets redundancy mode as follows:
Unit: 1=Unit 1
2=Unit 2
Mode: 0 = Manual
1 = Automatic
Example: RAM=11
RAM= (message OK)
RAM? (received OK,
but invalid arguments
found)
RAM* (message OK,
but not permitted in
current mode)
RAM?u
u=1 byte,
Value of 1, 2
RAM=um
(same format as
command
arguments)