Product specifications

MBT-4000 Multi-Band Transceiver System Revision 4
Remote Control MN/MBT4000.IOM
A–21
Parameter
Type
Command
(Instruction
Code and
qualifier)
V
alid on
MBT,
BDC, or
BUC
Arguments
for Command
or Response
to Query
Description of Arguments
(Note that all arguments are ASCII numeric codes – i.e.,
ASCII codes between 48 and 57)
Response to
Command
(Target to
Controller)
Query
(Instruction
Code and
qualifier)
Response to
Query
(Target to
Controller)
Serial Number N/A All 9 bytes,
numeric
000000000 to
999999999
Query only.
Used to Query the units 9 digit serial number.
Slave returns its S/N, in the form xxxxxxxxx.
Example: RSN=000000165
N/A RSN? RSN= x….x
(see description
for details of
arguments)
Retrieve
Utility Status
N/A MBT 24 bytes
alphanumeric
Query only.
Used to Query the utility status of the MBT-4000 base unit..
Example:
<0001/RUS={cr}
>0001/RUS={cr}{lf}
ADR=0001{cr}
BDR=9600{cr}{lf}
N/A RUS? RUS=x….x
(see description
for details of
arguments)
Remote Baud
Rate
SBR=xxxx MBT 4 bytes, Command or Query.
Set remote baud rate as follows:
9600 = 9600 baud
19K2 = 19200 baud
SBR= (message OK)
SBR? (received OK,
but invalid arguments
found)
SBR! (Command not
accepted by BUC
and BDC sub-units.)
SBR? SBR=xxxx
(same format as
command
arguments)
Summary
Fault Status
N/A All N/A Query only.
Used to Query the status of the Summary Fault Relay, where:
0=OK
1=FT
Example: SFS?
N/A SFS?
SFS=x
(see description
for details of
arguments)
Remote
Address
SPA=xxxx MBT 4 byte,
numeric
Command or Query.
Set Physical Address-between 0001 to 9999.
Resolution 0001
Example: SPA=0412
SPA= (message OK)
SPA? (received OK,
but invalid arguments
found)
SPA! (Command not
accepted by BUC
and BDC sub-units.)
SPA? SPA=xxxx
(same format as
command
arguments)