Product specifications

MBT-4000 Multi-Band Transceiver System Revision 4
Remote Control MN/MBT4000.IOM
A–23
Parameter
Type
Command
(Instruction
Code and
qualifier)
V
alid on
MBT,
BDC, or
BUC
Arguments
for Command
or Response
to Query
Description of Arguments
(Note that all arguments are ASCII numeric codes – i.e.,
ASCII codes between 48 and 57)
Response to
Command
(Target to
Controller)
Query
(Instruction
Code and
qualifier)
Response to
Query
(Target to
Controller)
Terminal
Status change
N/A All 1 byte,
value of 0,1
Query only.
Used to Query the status of the Terminal Status.
Where:
0=no change in status
1=change in status
Example: TSC=0
N/A TSC? TSC=x
(see description
for details of
arguments)
External
Reference
Fault Logic
XRF=x MBT 1 byte,
value of 0,1
Command or Query.
XRF controls whether or not the Software monitors the external
reference source. If enabled and no source is present, a fault will
be reported.
Where:
0=Ext Reference not monitored
1=Ext Reference is monitored and the lock state reported
Example: XRF=1
XRF=(message OK)
XRF?(received OK,
but invalid arguments
found)
XRF? XRF=x
(see description
for details of
arguments)