Product specifications

UT-4500-A Series Upconverters Revision 0
Appendix C MN-UT4500A
C–4
C.2.4 Converter I/O Modules
The Converter I/O Modules (IOM or TSM) are installed into the rear panel of the converter.
IMPORTANT
The thumbscrews used for installing the modules into the converter rear panel
are designed to be hand-tightened only. When installing an I/O Module DO
NOT
use a screwdriver to tighten the module mounting screws – install
screws “hand tight” only.
C.3 Spares
Comtech EF Data recommends field maintenance replacement at the RF converter level, and that
the converter is returned to Comtech EF Data for repairs. However, for field replacement of the
converter modules, contact Comtech EF Data for the correct spares for and particular converter.