Product specifications

UT-4500-A Series Upconverters Revision 0
Front Panel Operation MN-UT4500A
5–8
The user may view or edit the SNMP Write Community string. To edit, first use
the ! "arrows keys to select the character to edit, and then use the # $ arrows
keys to edit that character. Press ENTER when done.
CONFIG: Remote Control ! ETHERNET ! SNMP !
COMMUNITIES !TRAP
Trap Community:
comtech
The user may view or edit the SNMP Trap Community string. To edit, first use the
! "arrows keys to select the character to edit, and then use the # $ arrows
keys to edit that character. Press ENTER when done.
CONFIG: Remote Control ! ETHERNET ! SNMP ! TRAPS
TRAPIP1 TRAPIP2 VERSION
IP1 IP2 Version
Use the
! " arrow keys to select TRAPIP1, TRAPIP2, or VERSION, and then
press ENTER.
CONFIG: Remote Control ! ETHERNET ! SNMP ! TRAPS !
TRAPIP1/TRAPIP2
TRAP IP ADDRESS #1:
000.000.000.000
TRAP IP ADDRESS #2:
000.000.000.000
The user may view or edit the Trap Destination’s IP Addresses. To edit, first use
the ! " arrow keys to select the digit to edit, and then use the # $ arrow keys to
edit the value of that digit. Press ENTER when done.
Note: If both Trap IP Addresses are 000.000.000.000, it means Traps are disabled.
CONFIG: Remote Control ! ETHERNET ! SNMP ! TRAPS !
VERSION
Trap Version:
SNMPv1 SNMPv2
Use the # $ arrow keys to select the trap version – SNMPv1 or SNMPv2 – and
then press ENTER.