Product specifications

UT-4500-A Series Upconverters Revision 0
Front Panel Operation MN-UT4500A
5–18
Bootrom: FW-0000200
X.X.X MM/DD/YY
For IMAGE#1 and IMAGE#2, each image is further broken down as follows (where IMAGE#X
denotes IMAGE#1 or IMAGE#2):
IMAGE#X: Bulk APP FPGA
Use the ! " arrow keys to select Bulk, App, or FPGA, and then press ENTER. The screens
display information in a format similar to the examples that follow:
Bulk#X: FW-0000202
X.X.X MM/DD/YY
App#X: FW-0000203
X.X.X MM/DD/YY
FPGA#X: FW-0000204
X.X.X MM/DD/YY
UTILITY: Firmware ! SELECT
Current Active Image: #1
Next Reboot Image: #1 #2
The top line shows the Current Active Image. From the bottom line, use the
! " arrow keys to
select the Next Reboot Image (i.e., the image that will be active the next time the unit is
rebooted) as #1 or #2. Press ENTER when done.
If the image selected is already designated as the Next Reboot Image, the following message
displays:
THAT IMAGE IS ALREADY
CURRENT. NO CHANGE MADE.