Product specifications

UT-4500-A Series Upconverters Revision 0
Ethernet Management MN-UT4500A
6–3
6.3.3 SNMP Traps
The UT-4500-A has the ability to send out SNMP traps when certain events occur in the unit. The
UT-4500-A sends out traps when a fault occurs in the unit. A trap is sent both when a fault occurs
and is cleared.
The UT-4500-A supports both SNMPv1 traps and SNMPv2 notifications. Which style of traps
the UT-4500-A sends can be configured by the user using the conv4500ASNMPTrapVersion
OID.
The following are the MIB2 v1traps / v2 notifications that the UT-4500-A supports:
MIB2 SNMPv1 trap: Authentication Failure 5
MIB2 SNMPv2 notifications: Authentication Failure 1.3.6.1.6.3.1.1.5.5
The following tables are the Faults v1 traps / v2 notifications that the UT-4500-A supports.
Faults SNMPv1 traps:
conv4500APowerSupply15VFaultEventV1 62476401
conv4500APowerSupply14VFaultEventV1 62476402
conv4500AVccFaultEventV1 62476403
conv4500ATemperatureFaultEventV1 62476404
conv4500AIFLOLockFaultEventV1 62476405
conv4500ASumLockFaultEventV1 62476406
conv4500ACoarseLockFaultEventV1 62476407
conv4500AFineLockFaultEventV1 62476408
conv4500AHSBFaultEventV1 62476409
conv4500AEqualizerFaultEventV1 62476410
conv4500AExtRefOscFaultEventV1 62476411
conv4500ASummaryFaultV1 62476412
Faults SNMPv2 notifications:
conv4500APowerSupply15VFaultEvent
1.3.6.1.4.1.6247.64.2.1.1
conv4500APowerSupply14VFaultEvent
1.3.6.1.4.1.6247.64.2.1.2
conv4500AVccFaultEvent
1.3.6.1.4.1.6247.64.2.1.3
conv4500ATemperatureFaultEvent
1.3.6.1.4.1.6247.64.2.1.4
conv4500AIFLOLockFaultEvent
1.3.6.1.4.1.6247.64.2.1.5