Operation Manual

37
When no LED lights up, the speaker 5 is totally muted. Press button to
increase and button to reduce volume.
5. Once the PU is beyond the communication range of the BU for over 30 sec,
an out of range alarm will be heard together with all LEDs of level meter 4
start flashing to alert the parents. The alarm will only go off when the PU
falls back within the communication range of BU.
To turn off the alarm sound, press either or of button 2. The LEDs of
level meter 4 still keep flashing until the PU falls within the communication
range of BU.
N.B. This alarm will also be heard in case the BU is switched off, or its
battery has run down, or its power is cut off.
6. Each time button 8 is pressed, a beep tone will be heard to validate your
entry being recognized by the unit.
Both the BU and PU can be carried be around using the belt clip. To remove
the clip, follow diagram as shown.
PRECAUTIONS
- Use only the supplied AC adapters, use of other adapters may cause
damage to the CT-2400 baby monitor.
- When not using the monitor for a long period of time, remove all batteries
from the PU and BU to avoid damage due to battery leakage.
- Disconnect the AC adapter from the wall outlet when the monitor is not to
be operated.
- The CT-2400 is best performed within a temperature range of 0°C to
+50°C
- Do not leave the monitor expose to strong sunlight for a long time or
nearby any heat source, moisture and excessive environment.
- Do not open the cabinet, no serviceable parts inside.
CT-2400_Manual_04.pdf 37 28/4/14 6:03 pm