User`s manual

11
Chapter 2 Installation
2.1 Preparing for Hardware Installation
The following equipment may be necessary to install the router:
 A VT-100 compatible terminal
This terminal is essential to perform the initial configuration of the router.
Normally this is a terminal with a VT-100 emulation program, such as Telix.
 An RJ45-to-DB9 cable to connect to the Console Port
An RS232, RJ45-to-DB9 straight-through cable is required to connect the
terminal to the device.
 AC power adapter
A suitable power adapter is shipped with the router. It is used to provide the
necessary power for the router’s operation.
 LAN connection cable
To connect to a hub or PC, use an RJ45 cable.
 RJ11 cable
An RJ11 cable is needed to connect to the LINE port.
 Optional micro filter and POTS splitter
If you wish to connect both the router and a telephone, you will need the
optional micro filter or POTS splitter.