User`s manual

4.4.5 MER

MAC Encapsulation Routing (MER) enables the ATU-R to route IP addresses on the

RFC1483 bridged link. NAPT function is supported to allow multiple private IP

addresses on the LAN to share a public IP address.

To set up the MER service, configure the common fields, and then enter the IP

Address and Subnet Mask under the MER section of the screen. Click the Add button

to add the entry.

To modify an entry, complete the following steps:

STEP 1: Select the entry from the Current ATM PVC List, at the bottom of the

WAN Setup page. The current values of the selected entry will display in the

upper section of the page.

STEP 2: Change the parameters.

STEP 3: Click Modify.

To delete an entry, Select it from the Current ATM PVC List, at the bottom of the

WAN Setup page, and click the Delete button.