User`s manual

58
Traffic Class Name Enter name for traffic class
Priority Select Low, Medium or High.
IP Precedence Select between 0-7. The lower the digit
shows the higher the priority
IP Type Of Service Select either: Normal Service, Minimize
Cost, Maximize Reliability, Maximize
Throughput, Minimize Delay
Physical LAN Port User can select from: ENET, ENET(1-4), USB
or Wireless.
Protocol User can select from: TCP, TCP/UDP, UDP or
ICMP.
Source IP Address Enter the source IP address.
Source Subnet Mask Enter the subnet mask for the source IP
address.
Source Port (port or port:port) Enter source port number.
Destination IP address Enter destination IP address.
Destination Subnet Mask Enter destination subnet mask.
Destination port (port or port:port) Enter destination port number.
802.1p Priority Select between 0-7. The lower the digit
shows the higher the priority